※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 12677 は、技術委員会 ISO/TC 33, 耐火物によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 12677:2003) を取り消して置き換えるものです。この規格の方法は編集上およびレイアウト上大幅に変更されていますが、技術的な変更は限定的です。特定の方程式にいくつかのマイナーな修正が加えられました。唯一の重要な変更点は、この標準による分析用の還元物質の調製に関するさらなる国際標準法 (準備中) への参照、および 10.2.1 の最後に他の成分をキャリブレーションに追加する方法に関する説明、純度および準備です。試薬の。
1 スコープ
この国際規格は、蛍光 X 線 (XRF) 溶融キャスト ビーズ法による、耐火性および工業用セラミックの原材料、中間体、および製品の化学分析の方法を規定しています。この規格で分析できる典型的な材料は、箇条 3 に示されています。この国際規格は、炭化ケイ素や窒化物などの非酸化物材料には適用されません。要素の。
注記 1スズ、銅、亜鉛、クロムなどの特定の元素が多量に存在すると、融合プロセスが困難になる可能性があります。この場合、文献目録を参照することができます。
注記 2 (乾燥ベースで) 99% を超える濃度の成分は、すべての可能性のある微量成分と強熱減量が決定されている場合、差異によって報告されます。これらの数値は直接判定でも確認できます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO Guide 35:2006, 参考資料 — 認証の一般的および統計的原則
- ISO 565, 試験ふるい — 金属金網、穴あき金属板、電鋳シート — 目開きの公称サイズ
- ISO 26845, 耐火物の化学分析 — 湿式化学分析、原子吸光分析 (AAS) および誘導結合プラズマ原子発光分析 (ICP-AES) メソッドの一般要件
参考文献
| [1] | ISO 3534-2, 統計 - 語彙と記号 - Part 2: 応用統計 |
| [2] | ISO 21068-1, 炭化ケイ素含有原材料および耐火製品の化学分析 — Part 1: 一般情報およびサンプル準備 |
| [3] | ISO 21068-2, 炭化ケイ素含有原材料および耐火製品の化学分析 — Part 2: 強熱減量、全炭素、遊離炭素および炭化ケイ素、全シリカおよび遊離ケイ素、全ケイ素および遊離ケイ素の測定 |
| [4] | ISO 21068-3, 炭化ケイ素含有原材料および耐火製品の化学分析 — Part 3: 窒素、酸素、金属および酸化物成分の測定 |
| [5] | メラー、JW, 無機化学および理論化学に関する総合論文(ロンドン、ジョン・ワイリー & サンズ、1972) |
| [6] | CRC Handbook of Chemistry & Physics (Boca Raton, Florida, 33431, CRC Press Ltd, 1998) |
| [7] | G lassner 、A.、 2 500 °C での酸化物、フッ化物、および塩化物の熱化学的性質: 原子力委員会の報告書(アルゴンヌ国立研究所、1957 年) |
| [8] | B ennett , H. and Oliver , GJ, XRF Analysis of Ceramics, Minerals & Allied Materials (Chichester, John Wiley, 1992) (ISBN 0-471-93457-7) |
| [9] | AS 2503.6-2007, 耐火物および耐火物 — 化学分析 — Part 6: 耐火物、耐火モルタルおよびケイ酸塩材料 — 主要元素および微量元素の測定 — ホウ酸リチウム核融合を使用した波長分散型 X 線蛍光分析 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12677 was prepared by Technical Committee ISO/TC 33, Refractories.
This second edition cancels and replaces the first edition (ISO 12677:2003), which has been technically revised. Although the method in this International Standard has been considerably modified editorially and in layout, the technical changes are limited. Some minor corrections have been made to certain equations. The only significant changes are a reference to a further International Standard method (being prepared) for the preparation of reduced materials for analysis by this standard, and instructions on how to add other constituents to calibrations at the end of 10.2.1, Purity and preparation of reagents.
1 Scope
This International Standard specifies a method for the chemical analysis of refractory and technical ceramic raw materials, intermediates and products, by means of the X-ray fluorescence (XRF) fused cast-bead method. Typical materials that can be analysed by this standard are given in Clause 3. This International Standard is not applicable to non-oxide materials, such as silicon carbides or nitrides, etc. The method is applicable to a wide range of materials containing a wide range of elements.
NOTE 1 The presence of significant amounts of certain elements, such as tin, copper, zinc and chromium, can present difficulties in the fusion process. In this case, the Bibliography can be referred to.
NOTE 2 Constituents at concentrations greater than 99 % (on a dried basis) are reported by difference, provided that all likely minor constituents and any loss on ignition have been determined. These figures can also be checked by direct determination.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO Guide 35:2006, Reference materials — General and statistical principles for certification
- ISO 565, Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
- ISO 26845, Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
Bibliography
| [1] | ISO 3534-2, Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| [2] | ISO 21068-1, Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 1: General information and sample preparation |
| [3] | ISO 21068-2, Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon |
| [4] | ISO 21068-3, Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents |
| [5] | Mellor, J.W., Comprehensive Treatise on Inorganic and Theoretical Chemistry (London, John Wiley & Sons, 1972) |
| [6] | CRC Handbook of Chemistry & Physics (Boca Raton, Florida, 33431, CRC Press Ltd, 1998) |
| [7] | Glassner, A., The Thermochemical Properties of Oxides, Fluorides and Chlorides at 2 500 °C: Atomic Energy Commission Report (Argonne National Laboratory, 1957) |
| [8] | Bennett, H. and Oliver, G.J., XRF Analysis of Ceramics, Minerals & Allied Materials (Chichester, John Wiley,1992) (ISBN 0-471-93457-7) |
| [9] | AS 2503.6-2007, Refractories and refractory materials — Chemical analysis — Part 6: Refractories, refractory mortars and silicate materials — Determination of major and minor elements — Wavelength dispersive X-ray fluorescence spectrometry using lithium borate fusion |