※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 12803 は、技術委員会 ISO/TC 85, 原子力エネルギー、分科会SC 5, 核燃料技術によって作成されました。
1 スコープ
この国際規格は、設置されたタンク混合およびサンプリングシステムが、有機化合物や浮遊固体を含まない純粋な最終製品の硝酸プルトニウム溶液のバッチから代表的なサンプルを取得し、サンプルが使用されるまで代表的な状態を維持することを保証するために必要な基本的な注意事項を説明しています。
注 —この国際規格を適用すると、バッチから採取したサンプルのプルトニウム濃度と溶液中のプルトニウムの平均濃度の差が 0.2% 未満であることがわかります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 12803 was prepared by Technical Committee ISO/TC 85, Nuclear energy, subcommittee SC 5, Nuclear fuel technology.
1 Scope
This International Standard describes the basic precautions necessary to ensure that installed tank mixing and sampling systems achieve representative samples from a batch of pure final-product plutonium nitrate solution free from organic compounds and suspended solids, and that the samples remain representative until used.
NOTE — When this International Standard is applied, it can be shown that the difference between the plutonium concentration of the samples, taken from the batch, and the average concentration of plutonium in the solution is less than 0,2 %.