※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 61, プラスチック、小委員会 SC 11, 製品です。
ISO 12856 は、次の部分で構成されており、一般的なタイトルは「プラスチック - 鉄道用途 (鉄道枕木) 用のプラスチック製鉄道枕木」です。
- Part 1: 素材の特徴
以下のパーツが予定されています。
- Part 2: 製品
序章
鉄道の枕木は、主にプレストレスト コンクリート、木材、または鋼で製造されています。しかし、プラスチック材料の開発に基づいて、近年いくつかのプラスチック枕木が設置されています。
プラスチックの種類と製造プロセスが使用中の性能にさまざまな影響を与える可能性があるという事実を考慮して、ISO 12856 のこの部分では、プラスチック/複合枕木が作られる材料の一般的な特性をカバーし、それらの性能を指定します。 .
ISO 12856 のこの部分は、近い将来に開発される ISO 12856-2 と併せて使用されます。
ISO 12856 のこの部分は、強化プラスチック材料を含むプラスチック材料で作られた枕木に適用されます。
1 スコープ
ISO 12856 のこのパートでは、鉄道枕木の製造に使用されるプラスチックおよび強化プラスチック材料の特性を指定しています。
バラストの有無にかかわらず線路に設置される枕木および枕木の部品に適用できます。さまざまなタイプのプラスチックおよび強化まくらぎの例を付録 B に示します。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 62, プラスチック — 吸水量の測定
- ISO 7, プラスチック — 荷重下でのたわみ温度の決定
- ISO 178, プラスチック - 曲げ特性の測定
- ISO 291, プラスチック - コンディショニングとテストのための標準的な雰囲気
- ISO 306, プラスチック — 熱可塑性材料 — ビカット軟化温度 (VST) の測定
- ISO 527-2, プラスチック - 引張特性の測定 - Part 2: 成形および押出プラスチックの試験条件
- ISO 527-4, プラスチック - 引張特性の測定 - Part 4: 等方性および直交異方性の繊維強化プラスチック複合材の試験条件
- ISO 604, プラスチック - 圧縮特性の測定
- ISO 877-1:2009, プラスチック — 日射への暴露方法 — Part 1: 一般的なガイダンス
- ISO 877-2:2009, プラスチック — 日射への曝露方法 — Part 2: 窓ガラスの背後での直接的な風化と曝露
- ISO 1183-1, プラスチック — 非気泡プラスチックの密度を測定する方法 — Part 1: 浸漬法、液体比重瓶法、および滴定法
- ISO 2578, プラスチック — 熱に長時間さらされた後の時間温度制限の決定
- ISO 3611, 幾何学的製品仕様 (GPS) - 寸法測定装置: 外部測定用マイクロメータ - 設計および計測特性
- ISO 4892-2, プラスチック — 実験用光源への曝露方法 — Part 2: キセノン アークランプ
- ISO 4892-4, プラスチック — 実験室の光源への暴露方法 — Part 4: オープンフレーム カーボンアークランプ
- ISO 8256, プラスチック - 引張衝撃強度の測定
- ISO 10640, プラスチック — FTIR および UV/可視分光法によるポリマーの光老化の評価方法
- ISO 11357-2, プラスチック - 示差走査熱量測定 (DSC) - Part 2: ガラス転移温度とガラス転移ステップ高の決定
- ISO 11357-6, プラスチック — 示差走査熱量測定 (DSC) — Part 6: 酸化誘導時間 (等温 OIT) および酸化誘導温度 (動的 OIT) の決定
- ISO 11359-2, プラスチック - 熱機械分析 (TMA) - Part 2: 線熱膨張係数とガラス転移温度の決定
- ISO 13385-1, 幾何学的製品仕様 (GPS) — 寸法測定装置 — Part 1: キャリパー;設計と計測特性
- ISO 13385-2, 幾何学的製品仕様 (GPS) — 寸法測定装置 — Part 2: キャリパー深さゲージ;設計と計測特性
- ISO 14125, 繊維強化プラスチック複合材 — 曲げ特性の測定
- ISO/TR 19032, プラスチック — 実験室および屋外の気象条件を監視するためのポリエチレン参照標本 (PERS) の使用
- IEC 60695-11-20:2003, 火災危険性試験 — Part 11-20: 炎の試験 — 500 W 炎試験方法
参考文献
| [1] | ISO 179-1, プラスチック - シャルピー衝撃特性の測定 - Part 1: 機器を使用しない衝撃試験 |
| [2] | ISO 2818, プラスチック - 機械加工による試験片の準備 |
| [3] | WMO, いいえ。 8: 気象機器と観測方法のガイド。世界気象機関、第 7 版、2008 年 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 61, Plastics, Subcommittee SC 11, Products.
ISO 12856 consists of the following parts, under the general title Plastics — Plastic railway sleepers for railway applications (railroad ties):
- Part 1: Material characteristics
The following parts are planned:
- Part 2: Products
Introduction
Railway sleepers are manufactured mainly of pre-stressed concrete, wood, or steel. However, based on the development of plastic materials, some plastic sleepers have been installed in recent years.
In view of the facts that the types of plastics and manufacturing processes can have various effects on the in-service performance, this part of ISO 12856 covers the general characteristics of materials which plastic/composite sleepers are made from, in order to specify their performance.
This part of ISO 12856 will be used in conjunction with ISO 12856-2 to be developed in the foreseeable future.
This part of ISO 12856 applies to sleepers made from plastic materials, including reinforced plastic materials.
1 Scope
This part of ISO 12856 specifies the characteristics of plastic and reinforced plastic materials to be used in the manufacturing of railway sleepers.
It is applicable to the sleepers and parts of sleepers to be installed in tracks with or without ballast. Examples of different types of plastic and reinforced sleepers are given in Annex B.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 62, Plastics — Determination of water absorption
- ISO 75 (all parts), Plastics — Determination of temperature of deflection under load
- ISO 178, Plastics — Determination of flexural properties
- ISO 291, Plastics — Standard atmospheres for conditioning and testing
- ISO 306, Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
- ISO 527-2, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
- ISO 527-4, Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
- ISO 604, Plastics — Determination of compressive properties
- ISO 877-1:2009, Plastics — Methods of exposure to solar radiation — Part 1: General guidance
- ISO 877-2:2009, Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass
- ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
- ISO 2578, Plastics — Determination of time-temperature limits after prolonged exposure to heat
- ISO 3611, Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics
- ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
- ISO 4892-4, Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
- ISO 8256, Plastics — Determination of tensile-impact strength
- ISO 10640, Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
- ISO 11357-2, Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height
- ISO 11357-6, Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
- ISO 11359-2, Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
- ISO 13385-1, Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
- ISO 13385-2, Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Calliper depth gauges; Design and metrological characteristics
- ISO 14125, Fibre-reinforced plastic composites — Determination of flexural properties
- ISO/TR 19032, Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
- IEC 60695-11-20:2003, Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods
Bibliography
| [1] | ISO 179-1, Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| [2] | ISO 2818, Plastics — Preparation of test specimens by machining |
| [3] | WMO, No. 8: Guide to meteorological instruments and methods of observation. World Meteorological Organization, Seventh Edition, 2008 |