この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください。 序文 - 補足情報
この文書を担当する委員会は、ISO/TC 172, 光学およびフォトニクス、サブ委員会 SC 6, 測地および測量機器です。
この第 2 版は、技術的に改訂された第 1 版 (ISO 12858-1:1999) を廃止し、置き換えます。
ISO 12858 は、 「光学および光学機器 - 測地機器用補助装置」という一般タイトルのもと、次の部分で構成されています。
- Part 1: インバールのレベリングスタッフ
- Part 2: 三脚
- Part 3: 整準台
ISO 12858 のこの部分の付録 A は情報提供のみを目的としています。
導入
ISO 12858 シリーズは、測量において測地機器とともに使用される補助装置の仕様を詳述するいくつかの部分で構成されています。 ISO 12858 のこの部分では、インバーのレベリング スタッフの要件が指定されています。
必要に応じて、他の補助デバイスをカバーする追加の部品が ISO 12858 に追加される場合があります。
1 スコープ
ISO 12858 のこの部分では、測地学や産業で、平行板マイクロメーターを備えた光学機械式水準器、または同等の精度のデジタル水準器と組み合わせて高さを正確に測定するために使用されるインバール水準器の最も重要な要件が規定されています。
該当するのは、
- 目盛線と番号が付いた古典的な五線。
- コードパターンを使用したデジタルレベリングに使用されるスタッフ。
注意高低差の測定の不確かさは、水準器を含む測定システム全体の多数の影響要因に依存します。
ISO 12858 のこの部分は、メーカーによって次のように指定される場合がある、インバー レベリング スタッフの詳細な設計と構造 (例: 材料、ハンドル、支柱の固定点、インバー ストリップと円形レベルの固定) には適用されません。適切な。
2 規範的参照
以下の文書は、全部または一部がこの文書で規範的に参照されており、その適用には不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 9849, 光学および光学機器 — 測地および測量機器 — 語彙
3 用語と定義
この文書の目的には、ISO 9849 で与えられる用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 172, Optics and photonics, Subcommittee SC 6, Geodetic and surveying instruments.
This second edition cancels and replaces the first edition (ISO 12858-1:1999), which has been technically revised.
ISO 12858 consists of the following parts, under the general title Optics and optical instruments — Ancillary devices for geodetic instruments:
- Part 1: Invar levelling staffs
- Part 2: Tripods
- Part 3: Tribrachs
Annex A of this part of ISO 12858 is for information only.
Introduction
The ISO 12858 series consists of several parts which detail specifications for ancillary devices to be used with geodetic instruments in surveying. This part of ISO 12858 specifies requirements for Invar levelling staffs.
Additional parts, covering other ancillary devices, may be added to ISO 12858 as the need arises.
1 Scope
This part of ISO 12858 specifies the most important requirements of Invar levelling staffs used in geodesy and industry for precise measurement of heights in combination with either an optical-mechanical level equipped with a parallel plate micrometre, or a digital level of comparable precision.
It is applicable to
- classical staffs with graduation lines and numbering;
- staffs used in digital levelling with code patterns.
NOTE The measurement uncertainty of the height differences depends on a multitude of influencing factors of the whole measuring system including the levelling instruments.
This part of ISO 12858 is not applicable to the detailed design and construction of Invar levelling staffs (e.g. materials, handles, fixing points for the struts, fixing of the Invar strip and of the circular level), which may be selected by the manufacturer as appropriate.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 9849, Optics and optical instruments — Geodetic and surveying instruments — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 9849 apply.