この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part に規定されている規則に従って草案されています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この国際規格の要素の一部が特許権の対象となる可能性が注目されています。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
国際規格 ISO 12977 は、技術委員会 ISO/TC 47, 化学、小委員会 SC 7, 酸化アルミニウム、氷晶石、フッ化アルミニウム、フッ化ナトリウム、アルミニウム産業用炭素質材料によって作成されました。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格には、ピッチのトルエン溶液のガスクロマトグラフィー分析によるピッチの揮発性物質含有量の測定のための経験的方法が記載されています。この方法は経験に基づいた性質を持っているため、手順を厳密に遵守することが不可欠です。
2 規範的参照
以下の規範文書には、本文中の参照を通じてこの国際規格の規定を構成する規定が含まれています。日付が古い参照については、これらの出版物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することが推奨されます。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
3 用語、定義、記号
3.1 用語と定義
この国際規格の目的のために、次の用語と定義が適用されます。
3.1.1
揮発性物質含有量
使用条件下で大気圧沸点に相当するガスクロマトグラフィー保持時間を持つピッチ中に存在する成分の総質量パーセント
3.2 記号、下付き文字、および上付き文字
3.2.1 記号
| A | クロマトグラフィーのピークの表面積 |
| a | 回帰直線の傾き |
| В | 大気圧における同等の沸点 |
| b | 回帰直線の切片 |
| F | 表にまとめられたピーク面積を元のピッチサンプルの対応する質量パーセントに変換する係数 |
| K A | ジベンゾチオフェンとフェナントレンの面積比 |
| T | 保持時間の比率 |
| m | 校正化合物の質量 |
| R | 再現性 |
| R f | 校正化合物の応答係数 (5.2) |
| r | 再現性 |
| T | クロマトグラフィーピークの保持時間 |
| d | サンプル中に存在するジベンゾチオフェンの質量パーセント |
3.2.2 下付き文字と上付き文字
А、В、С ソリューション А、В、С はそれぞれクロマトグラム А、В、С に対応します
| d | ジベンゾチオフェン |
| i | i 番目のピーク |
| p | フェナントレン |
| ピッチ | ピッチ |
| T | 保持時間 |
| 死んだ | クロマトグラム内の校正化合物の総表面積 |
| 0 | オリジナルのピッチサンプルでの存在感 |
| 』 | ジベンゾチオフェン内部標準の添加による寄与 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 12977 was prepared by Technical Committee ISO/TC 47, Chemistry, Subcommittee SC 7, Aluminium oxide, cryolite, aluminium fluoride, sodium fluoride, carbonaceous materials for the aluminium industry.
Annex A of this International Standard is for information only.
1 Scope
This International Standard describes an empirical method for the determination of the volatile matter content of pitch by gas chromatographic analysis of its solution in toluene. Strict adherence to the procedure is essential because of the empirical nature of the method.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 565, Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings.
- ISO 1042, Laboratory glassware — One-mark volumetric flasks.
- ISO 6257, Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Sampling.
3 Term, definition and symbols
3.1 Term and definition
For the purposes of this International Standard, the following term and definition applies.
3.1.1
volatile matter content
total percentage by mass of those components present in the pitch which have gas-chromatographic retention times corresponding to atmospheric pressure boiling points up to 360 °C under the conditions used
3.2 Symbols, subscripts and superscripts
3.2.1 Symbols
| A | surface area of the chromatographic peak |
| a | slope of the regression line |
| В | equivalent boiling point at atmospheric pressure |
| b | intercept of the regression line |
| F | factor to convert tabulated peak areas to the corresponding percentages by mass in the original pitch sample |
| KA | ratio of areas of dibenzothiophene to phenanthrene |
| KT | ratio of retention times |
| m | mass of calibrant compound |
| R | reproducibility |
| Rf | response factor for calibrant compounds (5.2) |
| r | repeatability |
| T | retention time of the chromatographic peak |
| wd | percentage by mass of dibenzothiophene present in sample |
3.2.2 Subscripts and superscripts
А, В, С solutions А, В, С corresponding respectively to chromatograms А, В, С
| d | dibenzothiophene |
| i | i-th peak |
| p | phenanthrene |
| pitch | pitch |
| T | retention time |
| tot | total surface area of calibrant compounds in the chromatogram |
| 0 | presence in the original pitch sample |
| ′ | contribution resulting from the addition of the dibenzothiophene internal standard |