この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 12988-2 は、技術委員会 ISO/TC 47, 化学、小委員会 SC 7, 酸化アルミニウム、氷晶石、フッ化アルミニウム、フッ化ナトリウム、アルミニウム産業用炭素質製品によって作成されました。
ISO 12988 は、「アルミニウムの製造に使用される炭素質材料 - 焼成陽極 - 二酸化炭素に対する反応性の測定」という一般タイトルのもと、次の部分で構成されています。
- Part 1: 質量損失法
- Part 2: 熱重量分析法
導入
CO 2 の反応性、または反応速度は、炭素アーチファクトが二酸化炭素と反応する傾向を定量化するために使用されます。これらの望ましくない副反応によって消費された炭素は、アルミナを一次金属に還元する一次反応には利用できません。 CO 2 の反応性とダスティング率は、炭素加工品のコークス凝集体またはバインダーコークスがこれらのガスと選択的に反応する傾向を定量化するために使用されます。これらのガスによる炭素加工品のバインダーコークスまたはコークス凝集体の優先的な攻撃により、一部の炭素が脱落または粉塵になり、その炭素がアルミナを還元する一次反応に使用できなくなり、さらに重要なことに、アルミニウム還元セルの効率が低下します。
CO 2反応性と粉塵速度の比較は、アルミニウム還元産業における特定の製錬技術用の商用アノードの製造用の原材料を選択する際に役立ちます。
co 2反応性は、有効性と選鉱プロセスの評価、または研究目的に使用されます。
サンプリングガイドラインは開発中です。
ISO 12988 のこの部分は ASTM D 6558-00 に基づいています。
警告 — ISO 12988 のこの部分は、その使用に関連する安全上の懸念がある場合、そのすべてに対処することを目的としたものではありません。 ISO 12988 のこの部分の使用者は、使用前に適切な安全衛生慣行を確立し、規制上の制限の適用可能性を判断する責任があります。
1 スコープ
この試験方法は、アルミニウム還元産業で使用される成形カーボン陽極の CO 2反応性と粉塵の熱重量測定 (TGA) 測定を対象としています。さまざまな熱条件、サンプルサイズ能力、構成材料、および質量損失とその後の反応速度を決定するための手順を備えた多くのタイプの装置が利用可能です。この試験方法は、サンプルの寸法、反応温度、露出表面上のガス速度、および反応時間の変数を標準化し、異なる種類の装置で得られた結果が相関できるようにします。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ASTM E 691-99, 試験方法の精度を決定するために実験室間研究を実施するための標準慣行
3 用語と定義
ISO 12988 のこの部分の目的のために、次の用語と定義が適用されます。
3.1
ほこりを払う
a
テスト中に炭素アーチファクトから落下し、反応チャンバーの底部の容器に収集される炭素の量
3.2
最終的なCO2反応度
a
反応チャンバー内で CO 2にさらされた最後の 30 分間における炭素アーチファクトの質量損失率を、サンプルの最初の幾何学的 (直円筒状) 露出表面積で割ったもの
注記 1:最終的な CO 2反応性は、ミリグラム/平方センチメートル/時間で表されます。
3.3
初期CO2反応度
a
反応チャンバー内で CO 2に曝露されてから最初の 30 分間の炭素アーチファクトの質量損失率を、サンプルの初期幾何学的 (直円筒状) 曝露表面積で割ったもの
注記 1:初期 CO 2反応性は、ミリグラム/平方センチメートル/時間で表されます。
3.4
総CO 2反応度
a
反応チャンバー内でサンプルが CO 2に曝露される合計時間 (420 分) 中の炭素アーチファクト (粉塵を含む) の質量損失の速度を、サンプルの初期幾何学的 (直円筒状) 曝露表面積で割ったもの
注記 1:総 CO 2反応性は、ミリグラム/平方センチメートル/時間で表されます。
参考文献
| 1 | ASTM D 6353, アルミニウム製造に使用されるプレベークアノードのサンプリング計画とコアサンプリングに関する標準ガイド |
| 2 | ASTM D 6354, アルミニウム製造に使用されるカーボンカソードブロックのサンプリング計画とコアサンプリングに関する標準ガイド |
| 3 | ASTM D 6558, 焼成炭素アノードおよびカソード ブロックの TGS CO 2反応性を測定するための試験方法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12988-2 was prepared by Technical Committee ISO/TC 47, Chemistry, Subcommittee SC 7, Aluminium oxide, cryolite, aluminium fluoride, sodium fluoride, carbonaceous products for the aluminium industry.
ISO 12988 consists of the following parts, under the general title Carbonaceous materials used in the production of aluminium — Baked anodes — Determination of the reactivity to carbon dioxide:
- Part 1: Loss in mass method
- Part 2: Thermogravimetric method
Introduction
The CO2 reactivities, or reaction rates, are used to quantify the tendency of a carbon artifact to react with carbon dioxide. Carbon consumed by these unwanted side reactions is unavailable for the primary reactions of reducing alumina to the primary metal. CO2 reactivities and dusting rates are used to quantify the tendency of the coke aggregate or binder coke of a carbon artifact to selectively react with these gases. Preferential attack of the binder coke or coke aggregate of a carbon artifact by these gases causes some carbon to fall off or dust, making the carbon unavailable for the primary reaction of reducing alumina and, more importantly, reducing the efficiency of the aluminium reduction cell.
Comparison of CO2 reactivities and dusting rates is useful in selecting raw materials for the manufacture of commercial anodes for specific smelting technologies in the aluminium reduction industry.
co2 reactivities are used for evaluating effectiveness and beneficiation processes, or for research purposes.
Sampling guidelines are under development.
This part of ISO 12988 is based on ASTM D 6558-00.
WARNING — This part of ISO 12988 does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this part of ISO 12988 to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This test method covers the thermogravimetric (TGA) determination of CO2 reactivities and dusting of shaped carbon anodes used in the aluminium reduction industry. Many types of apparatus are available with a wide variety of thermal conditions, sample-size capability, materials of construction and procedures for determining the mass loss and subsequent rate of reaction. This test method standardizes the variables of sample dimensions, reaction temperature, gas velocity over the exposed surfaces, and reaction time such that results obtained on different types of apparatus are correlatable.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ASTM E 691-99, Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
3 Terms and definitions
For the purposes of this part of ISO 12988, the following terms and definitions apply.
3.1
dusting
aRCD
that quantity of carbon that falls off the carbon artifact during the test and is collected in the container at the bottom of the reaction chamber
3.2
final CO2 reactivity
aRCf
rate of mass loss of the carbon artifact during the final 30 min of exposure to CO2 in the reaction chamber divided by the initial geometric (right cylindrical) exposed surface area of the sample
Note 1 to entry: The final CO2 reactivity is expressed in milligrams per square centimetre per hour.
3.3
initial CO2 reactivity
aRCi
rate of mass loss of the carbon artifact during the first 30 min of exposure to CO2 in the reaction chamber divided by the initial geometric (right cylindrical) exposed surface area of the sample
Note 1 to entry: The initial CO2 reactivity is expressed in milligrams per square centimetre per hour.
3.4
total CO2 reactivity
aRCt
rate of mass loss of the carbon artifact (including dusting) during the total time that the sample is exposed to CO2 (420 min) in the reaction chamber divided by the initial geometric (right cylindrical) exposed surface area of the sample
Note 1 to entry: The total CO2 reactivity is expressed in milligrams per square centimetre per hour.
Bibliography
| 1 | ASTM D 6353, Standard Guide for Sampling Plan and Core Sampling of Prebaked Anodes Used in Aluminum Production |
| 2 | ASTM D 6354, Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production |
| 3 | ASTM D 6558, Test Method for Determination of TGS CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks |