※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 1307 は、技術委員会 ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 1, ホース (ゴムおよびプラスチック)によって作成されました。
この第 4 版は、技術的に改訂された第 3 版 (ISO 1307:1992) を廃止し、置き換えるものです。この改訂には、製造プロセスに従ってホースをタイプ別に分類し、追加サイズを追加し、最新のホース規格と一致するように内径公差を最小寸法と最大寸法に変更することが含まれます。
1 スコープ
この国際規格は、ゴムおよびプラスチックのホースのサイズと、各ホース サイズに許可される最小および最大内径を指定します。そのため、ホースはその製造工程により4種類に分けられます。この規格では、産業用および自動車用の用途に合わせて長さにカットされたゴムおよびプラスチックのホースの公差も指定しています。この規格は、別のホース サイズを使用する正当な理由がない限り、または特定の用途でホース サイズに異なる内径範囲が必要な場合を除き、関連するホース製品規格とともに使用することを目的としています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1307 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 1, Hoses (rubber and plastics).
This fourth edition cancels and replaces the third edition (ISO 1307:1992), which has been technically revised. The revision includes classifying the hoses by type according to the manufacturing process, adding additional sizes, and changing the inside-diameter tolerances to minimum and maximum dimensions to be consistent with the latest hose standards.
1 Scope
This International Standard specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. For this purpose, hoses are divided into four types according to the process by which they are manufactured. The standard also specifies tolerances on cut-to-length rubber and plastics hoses for industrial and automotive applications. This standard is intended to be used with the relevant hoses product standard unless there is justification for using a different hose size or unless a hose size needs a different inside-diameter range for a particular application.