※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 13464 は、技術委員会 ISO/TC 85, 原子力エネルギー、小委員会 5, 核燃料技術によって作成されました。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、再処理工場からの硝酸供給溶液中のウランとプルトニウムの体積濃度を同時に測定するための非破壊法を規定しています。この方法は、元の供給溶液に干渉することなく直接適用できます。この供給溶液は、通常、約 150 g l -1から 300 g l -1のウランと 1 g l -1から 2.5 g l -1のプルトニウムを含みます。 、最大10 TBq l -1のγ活性。
附属書 A
参考文献
| [1] | Ottmar, H.、Eberle, H. (1991)、 KfK - 4590 、Kernforschungszentrum カールスルーエ、ドイツ。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 13464 was prepared by Technical Committee ISO/TC 85, Nuclear energy, Subcommittee 5, Nuclear fuel technology.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies a nondestructive method for the simultaneous determination of volumetric uranium and plutonium concentrations in nitric acid feed solutions from reprocessing plants. The method is directly applicable, without interference, to the original feed solution, which typically contains about 150 g·l−1 to 300 g·l−1 uranium and 1 g·l−1 to 2,5 g·l−1 plutonium in the presence of fission products with a total ß,γ-activity of up to 10 TBq·l−1.
Annex A
Bibliography
| [1] | Ottmar, H., Eberle, H. (1991), KfK — 4590, Kernforschungszentrum Karlsruhe, Germany. |