この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
この国際規格の目的は、環境騒音評価で使用する記述子の量を評価するための枠組みを提供することです。このフレームワークのPartには、高エネルギー衝撃音源からある程度離れた場所でのイベント音響暴露レベルの統計的分布を計算するための工学的手法が含まれています。これは特に環境騒音評価を目的としており、建物への損傷のリスクや動物や人への傷害のリスクを評価するためのものではありません。
ISO 9613-2 では、交通や産業などの発生源からのイミッション レベルは、いわゆる「風下」条件に対して計算されます。長期平均レベルは、補正係数Cmetを使用して推定されます。この概念は、そのような音源からの音が環境騒音として評価される距離に当てはまります。 ISO 9613-2 はその適用範囲からインパルスを除外し、A 重み付け、地上近くのソースと受信機、および最大約 1000 m の距離に対してのみ保持します. 高エネルギーのインパルス音源の場合、インパルス音イベントの持続時間は短く、低周波は、交通や産業用の音源よりも顕著です。一般に、低周波の音は、大気中の特定の距離では高周波よりも減衰が少なく、結果として、はるかに長い距離にわたる伝播のレベルに影響を与える効果を考慮する必要があります。
地面の反射、地形による遮へい、屈折と乱気流の気象効果を考慮した方法の概要を示します。このメソッドは、発生源強度から開始して、一連のレプリカ大気のイミミッション レベルの分布を計算します。各レプリカは、大気吸収クラスと過剰減衰クラスの特定の組み合わせです。この手順を使用して実際の計算を実行するには、気象および地表面条件の統計的寄与を利用することが役立ちます。特に、風速、風向、温度、湿度、および大気安定度の発生頻度のヒストグラムを使用して、クラスを記述することができます。イミッション レベルの分布から、いくつかの評価指標を取得できます。たとえば、長期平均イミッション レベルは加重平均として計算できます。重み係数は、関心のある場所の関連する期間中の各レプリカ大気の発生確率によって決定されます。
Introduction
The aim of this International Standard is to provide a framework for the evaluation of descriptor quantities for use in environmental noise assessment. Part of this framework includes an engineering method for calculating a statistical distribution of event sound exposure levels at locations which are some distance from high-energy impulsive sound sources. It is specifically intended for environmental noise assessment and not for the assessment of the risk of damage to buildings or the risk of injury to animals or people.
In ISO 9613-2, the immission level from sources such as traffic and industry is calculated for a so-called"downwind" condition. The long-term average level is estimated using a correction factor, Cmet. This concept holds for distances where sound from such sources is assessed as environmental noise. ISO 9613-2 excludes impulses in its scope and holds only for A-weighting, for near-ground sources and receivers and for distances up to about 1 000 m. For high-energy impulsive sound sources, the impulsive sound event duration is short, and low frequencies are more prominent than for traffic and industrial sound sources. Lower-frequency sounds are generally less attenuated over a given distance in the atmosphere than higher frequencies and, as a consequence, the level-influencing effects of propagation over much larger distances need to be taken into account.
A general outline is given of a method that takes into account ground reflection, shielding by topography and the meteorological effects of refraction and turbulence. Starting from the source strength, this method calculates a distribution of immission levels for a set of replica atmospheres, each replica being a specific combination of atmospheric-absorption class and excess-attenuation class. To carry out practical calculations using the procedure, it is useful to exploit the statistical contribution of the meteorological and ground surface conditions. In particular, histograms of the frequencies of occurrence of the wind velocity, wind direction, temperature, humidity and atmospheric stability can be used to describe the classes. From the distribution of the immission levels, a number of assessment metrics can be obtained. For instance, the long-term averaged immission level can be calculated as a weighted average. The weighting factors are determined by the probability of occurrence of each replica atmosphere during the relevant time period for the location of interest.