この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 69, 統計的方法の適用、小委員会 SC 6, 測定方法および結果です。
この ISO 13528 の第 3 版は、マイナー リビジョンを構成する第 2 版 (ISO 13528:2015) を取り消して置き換えます。変更点は次のとおりです。
- 10.1, 10.4.3, および 10.5.3 に注記が追加され、10.1 の規定を満たすのに役立つ追加のグラフィック手法に注意を向けることができます。
- 式 B.4 と B.8 は、 の代わりに使用するように修正されました。
- 式 B.16 は、平方根内の項が常に非負になるように修正されました。
- 表 C.2 では、 p = 2 に関連する補正係数が 0.3994 に修正されています。
- 表 C.2 の値のソースへの追加の文献参照が参考文献に追加され、C.5.2.1 の注記 1 および 2 から参照されています。
- フォント スタイル (イタリックまたはローマン) は、式の一貫性のために全体を通して承認されています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 69, Applications of statistical methods, Subcommittee SC 6, Measurement methods and results.
This third edition of ISO 13528 cancels and replaces the second edition (ISO 13528:2015), of which it constitutes an minor revision. The changes are as follows:
- notes have been added to 10.1, 10.4.3 and 10.5.3 to draw attention to additional graphical techniques that can assist in meeting the provisions of 10.1;
- Formulae B.4 and B.8 have been corrected to use instead of ;
- Formula B.16 has been corrected so that the term inside the square root is always non-negative;
- Table C.2, the correction factor associated with p = 2 has been corrected to read 0,3994;
- additional literature references to the source of values in Table C.2 have been added to the Bibliography and referenced from Notes 1 and 2 of C.5.2.1;
- font styles (Italic or Roman) have been amended throughout for consistency in formulae.