この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の規範文書には、本文中の参照を通じてこの国際規格の規定を構成する規定が含まれています。日付が古い参照については、これらの出版物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することが推奨されます。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 921:1997, 原子力エネルギー - 語彙
- ISO 7212, 電離放射線に対する保護のためのエンクロージャ — 厚さ 50 mm および 100 mm の壁用の鉛シールド ユニット
- ISO 8529-1, 基準中性子線 — Part 1: 生成の特性と方法
- ISO 8529-3, 基準中性子放射線 - Part 3: 面積線量計と個人線量計の校正、およびエネルギーと入射角の関数としての応答の決定
- ISO 9404-1, 電離放射線に対する保護のためのエンクロージャ — 厚さ 150 mm, 200 mm, および 250 mm の壁用の鉛シールド ユニット — Part 1: 厚さ 150 mm および 200 mm のシェブロン ユニット
- ISO 15080, 原子力施設 - シールドエンクロージャーの換気貫通部
- ICRP 6, 1990 年の放射線防護に関する国際委員会の勧告、 ICRP Publication 60, Annals of the ICRP, 21, (1-3)、Pergamon Press, オックスフォード (1991)
- ICRU 3, 外部放射線源から生じる線量当量の決定、 ICRU 報告書 39, 198, 放射線防護線量測定における量と単位、ICRU 報告書 51, 199, 外部放射線に対する放射線防護で使用するための変換係数、 ICRU 報告書 57, 199, 電離放射線の基本量と単位、ICRU 報告書 60, 199, 安全ガイド、安全シリーズ No. 76, 放射線防護用語集、ウィーン
- IAE, 安全ガイド、安全シリーズ No. 115 、電離放射線に対する保護および放射線源の安全に関する国際基本安全基準、ウィーン
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 921:1997, Nuclear energy — Vocabulary
- ISO 7212, Enclosures for protection against ionizing radiation — Lead shielding units for 50 mm and 100 mm thick walls
- ISO 8529-1, Reference neutron radiations — Part 1: Characteristics and methods of production
- ISO 8529-3, Reference neutron radiations — Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence
- ISO 9404-1, Enclosures for protection against ionizing radiation — Lead shielding units for 150 mm, 200 mm and 250 mm thick walls — Part 1: Chevron units of 150 mm and 200 mm thickness
- ISO 15080, Nuclear facilities — Ventilation penetrations for shielded enclosures
- ICRP 60 (1991), 1990 Recommendations of the International Commission on Radiological Protection, ICRP Publication 60, Annals of the ICRP, 21, (1-3), Pergamon Press, Oxford (1991)
- ICRU 39 (1985), Determination of Dose Equivalents Resulting from External Radiation Sources, ICRU Report 39, 1985 (International Commission on Radiation Units and Measurements, Bethesda, MD)
- ICRU 51 (1993), Quantities and Units in Radiation Protection Dosimetry, ICRU Report 51, 1993 (International Commission on Radiation Units and Measurements, Bethesda, MD)
- ICRU 57 (1998), Conversion Coefficients for use in Radiological Protection against External Radiation, ICRU Report 57, 1998 (International Commission on Radiation Units and Measurements, Bethesda, MD)
- ICRU 60 (1998), Fundamental Quantities and Units for Ionizing Radiation, ICRU Report 60, 1998 (International Commission on Radiation Units and Measurements, Bethesda, MD)
- IAEA 1) (1986), Safety Guides, Safety Series No. 76, Radiation Protection Glossary, Vienna
- IAEA (1996), Safety Guides, Safety Series No. 115, International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources, Vienna