※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参照については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 6879:1995, 空気品質 — 空気品質測定方法の性能特性および関連概念。
- ISO 7935:1992, 大気の質 - 定常発生源排出 - 二酸化硫黄の質量濃度の測定 - 自動測定方法の性能特性。
- ISO 9096:1992, 定常発生源排出 — ガス搬送ダクト内の粒子状物質の濃度と質量流量の決定 — 手動重量測定法。
- ISO 9169:1994, 空気の質 — 測定方法の性能特性の決定。
- ISO 10155:1995, 固定発生源放出 — 粒子の質量濃度の自動監視 — 性能特性、試験方法、および仕様。
- ISO 10780:1994, 空気の質 - 定常発生源の排出 - ダクト内のガス流の速度と流量の測定。
- ISO 10849:1996, 定常発生源排出 — 窒素酸化物の質量濃度の決定 — 自動測定システムの性能特性と校正。
- ISO 12039: — 1) 、定常発生源放出 — CO, CO 2および O 2の体積濃度の決定 — 自動測定システムの性能特性および校正。
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 6879:1995, Air quality — Performance characteristics and related concepts for air quality measuring methods.
- ISO 7935:1992, Air quality — Stationary source emissions — Determination of mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods.
- ISO 9096:1992, Stationary source emissions — Determination of concentration and mass flow rate of particulate material in gas-carrying ducts — Manual gravimetric method.
- ISO 9169:1994, Air quality — Determination of performance characteristics of measurement methods.
- ISO 10155:1995, Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications.
- ISO 10780:1994, Air quality — Stationary source emissions — Measurement of velocity and volume rate of flow of gas streams in ducts.
- ISO 10849:1996, Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics and calibration of automated measuring systems.
- ISO 12039: — 1) , Stationary source emissions — Determination of the volumetric concentration of CO, CO2 and O2 — Performance characteristics and calibration of automated measuring systems.