この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、境界、CO 2排出係数、およびすべてのタイプのプロセス ルートについて上流の排出が考慮される中間製品を定義することにより、すべてのタイプのプロセス ルートを使用する製鉄所での CO 2強度を計算するためのガイダンスを提供します。特に、このドキュメントは、ISO 14404 シリーズに適用される、以下にリストされている製鉄所のタイプに適用されるガイダンスを提供します。このドキュメントには、CO 2排出量の計算を支援するために、ISO 14404-1, ISO 14404-2, および ISO 14404-3 からのすべての関連する排出源をカバーするユニバーサル計算シートも含まれています。
- 私。 ISO 14404-1, ISO 14404-2, および ISO 14404-3 (7.2.1) とは異なるプロセス ルートを持つ製鉄所
- ii.複数のプロセスルートを持つ製鉄所 (7.2.2)
- iii.外部から銑鉄を購入する製鉄所 (7.2.3)
- IV.外部から粗鋼の一部または全部を購入する製鉄所およびリローラー (7.2.4)
さらに、このドキュメントは、以下のトピックについて、ISO 14404 シリーズ全体に追加のガイダンスを提供します。
- a)輸出スラグの評価
- b)副生ガスの評価
- c)ストックの評価
- d)電気と燃料の発熱量と排出係数の選択
エネルギー消費量および消費効率への換算は、附属書 A を使用して取得できます。
計算結果の使用はこのドキュメントの範囲外ですが、適切なアプリケーションと不適切なアプリケーションは別紙 B で推奨されています。
1 Scope
This document provides guidance for calculating the CO2 intensity at steel plants with all types of process routes, by defining the boundary, CO2 emission factors and the intermediate products for which upstream emissions are considered for all types of process routes. In particular, this document provides guidance applicable to the ISO 14404 series to the types of steel plants listed below. This document also includes the Universal Calculation Sheet, which covers all relevant emission sources from ISO 14404-1, ISO 14404-2 and ISO 14404-3 to assist the calculation of CO2 emissions.
- i. Steel plants with different process routes from ISO 14404-1, ISO 14404-2 and ISO 14404-3 (7.2.1)
- ii. Steel plants with more than one process route (7.2.2)
- iii. Steel plants purchasing pig iron from the outside (7.2.3)
- iv. Steel plants and rerollers purchasing part or all of crude steel from outside (7.2.4)
Moreover, this document provides additional guidance to the entire ISO 14404 series for the following topics.
- a) Evaluation of exported slags
- b) Evaluation of by-product gas
- c) Evaluation of stock
- d) Selection of calorific values and emission factors for electricity and fuel
Conversion to energy consumption and to consumption efficiency can be obtained using Annex A.
While the use of the calculation result is outside the scope of this document, appropriate applications and inappropriate application are recommended in Annex B.