※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part に規定されている規則に従って草案されています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この国際規格の要素の一部が特許権の対象となる可能性が注目されています。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
国際規格 ISO 14422 は、技術委員会 ISO/TC 47, 化学、小委員会 SC 7, 酸化アルミニウム、氷晶石、フッ化アルミニウム、フッ化ナトリウム、アルミニウム産業用の炭素質製品によって作成されました。
1 スコープ
この国際規格は、アルミニウム製造に使用されるコールドラムペーストのサンプリング方法と条件について説明しています。
2 基準参照
以下の規範文書には、本文中での参照を通じてこの国際規格の規定を構成する規定が含まれています。日付が古い参照については、これらの出版物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することが推奨されます。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 6257, アルミニウムの製造に使用される炭素質材料 - 電極のピッチ - サンプリング。
3 用語と定義
この国際規格の目的のために、ISO 6257 および以下に示されている用語と定義が適用されます。
3.1
コールドラミングペースト
段階的な炭素質骨材と、加熱すると硬化して炭素質結合を形成する結合材を含む混合物
注記 1:このような混合物は、機械または空気圧ツールまたは振動を使用して、周囲温度または周囲温度付近で設置する必要があります。
3.2
インクリメント
サンプリング装置を使用した 1 回の操作でサンプルユニットから採取される物質の量
3.3
テスト部分
実験室サンプルから採取され、特定の測定での使用に適した方法で調製された物質の量
3.4
サンプルユニット
アイテム
境界を持つ定義された量の材料
注記 1:境界は、コンテナなどの物理的なものでも、物質の流れの場合は特定の時間や時間間隔などの時間的なものでもよい。
注記 2:多数のサンプルユニットが、例えばパッケージや箱の中に集められる場合があります。
注記 3:英語では、「品目」、「単位」、「個人」という用語が「サンプル単位」の同義語として使用されることがあります。フランス語では、「individu」という用語が「unité d'échantillonnage」の同義語として使用されることがあります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 14422 was prepared by Technical Committee ISO/TC 47, Chemistry, Subcommittee SC 7, Aluminium oxide, cryolite, aluminium fluoride, sodium fluoride, carbonaceous products for the aluminium industry.
1 Scope
This International Standard describes methods and conditions for sampling of cold-ramming pastes used in aluminium manufacture.
2 Normative reference
The following normative document contains provisions which, through reference in this text, constitutes provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 6257, Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Sampling.
3 Terms and definitions
For the purposes of this International Standard, the terms and definitions given in ISO 6257 and the following apply.
3.1
cold-ramming paste
mixture containing graded carbonaceous aggregate and bonding materials which harden when heated to form a carbonaceous bond
Note 1 to entry: Such a mixture needs to be installed at or near ambient temperature by the use of mechanical or pneumatic tools or vibration.
3.2
increment
amount of material taken from a sample unit in a single operation with a sampling device
3.3
test portion
amount of material taken from the laboratory sample and prepared in a manner suitable for use in a particular determination
3.4
sample unit
item
defined quantity of material having a boundary
Note 1 to entry: The boundary may be physical, for example a container, or temporal, for example a particular time or time interval in the case of a stream of material.
Note 2 to entry: A number of sample units may be gathered together, for example in a package or box.
Note 3 to entry: In English, the terms"item","unit" and"individual" are sometimes used as synonyms for"sample unit". In French, the term"individu" is sometimes used as a synonym for"unité d'échantillonnage".