※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 14943 は、技術委員会 ISO/TC 85, 原子力エネルギー、小委員会 SC 5, 核燃料技術によって作成されました。
序章
効果的な原子力臨界安全プログラムには、管理、監督、および原子力臨界安全スタッフ間の協力が含まれ、各従業員は運用手順への準拠に依存しています。安全関連活動の範囲と複雑さは、核分裂性物質を扱う作業の規模と種類によって大きく異なる可能性がありますが、特定の安全要素は一般的です。この国際規格は、核臨界安全に関連するそのような要素の体系化を表しています。核臨界安全に関する一般的なガイダンスは、ISO 1709 に記載されています。
1 スコープ
この国際規格は、原子炉の外で行われ、臨界事故の可能性が存在する操作に対する原子力臨界安全関連活動の管理基準を提供します。
管理、監督、および核臨界安全スタッフの責任が取り上げられています。操作手順と緊急手順の目的と特徴は、この国際規格に含まれています。
参考文献
| [1] | ISO 1709:1995, 原子力 - 核分裂性物質 - 貯蔵、取り扱い、処理における臨界安全の原則 |
| [2] | ISO 7753:1987, 原子力エネルギー — 臨界検出および警報システムの性能および試験要件 |
| [3] | IEC 60860:1987, 臨界事故の警報装置 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14943 was prepared by Technical Committee ISO/TC 85, Nuclear energy, Subcommittee SC 5, Nuclear fuel technology.
Introduction
An effective nuclear criticality-safety programme includes cooperation among management, supervision, and the nuclear criticality-safety staff and, for each employee, relies upon conformance with operating procedures. Although the extent and complexity of safety-related activities may vary greatly with the size and type of operation with fissile material, certain safety elements are common. This International Standard represents a codification of such elements related to nuclear criticality safety. General guidance for nuclear criticality safety may be found in ISO 1709.
1 Scope
This International Standard provides criteria for the administration of nuclear criticality-safety-related activities for operations which take place outside of reactors and for which there exists a potential for criticality accidents.
The responsibilities of management, supervision, and the nuclear criticality-safety staff are addressed. The Objectives and characteristics of operating and emergency procedures are included in this International Standard.
Bibliography
| [1] | ISO 1709:1995, Nuclear energy — Fissile materials — Principles of criticality safety in storing, handling and processing |
| [2] | ISO 7753:1987, Nuclear energy — Performance and testing requirements for criticality detection and alarm systems |
| [3] | IEC 60860:1987, Warning equipment for criticality accidents |