この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
導入
ISO 15136 のこの部分は、プログレッシブ キャビティ ポンプ表面駆動システムのユーザー/購入者およびサプライヤー/メーカーによって開発され、世界中の石油および天然ガス産業での使用を目的としています。 ISO 15136-2 は、範囲で定義されているプログレッシブ キャビティ ポンプ表面駆動システムの選択、製造、テスト、および使用に関する要件と情報を両当事者に提供します。さらに、ISO 15136-2 はサプライヤー要件に対応しており、サプライヤーがこの国際規格への適合を主張するために遵守しなければならない最小パラメータを設定しています。
ISO 15136-2 は、品質管理文書の要件の増加に対応できるように構成されています。これらのバリエーションにより、ユーザー/購入者は特定の用途に必要なグレードを選択できます。
品質管理文書には 2 つのグレードがあり、ユーザー/購入者は好みや用途に合わせて要件を選択できます。品質管理ドキュメント グレード Q2 は提供される標準グレードで、品質管理ドキュメント グレード Q1 は追加のドキュメントを提供します。ユーザー/購入者は追加の要件を補足要件として指定できます。
この国際規格のユーザーは、この国際規格で概説されている要件を超える要件が個々のアプリケーションに必要となる可能性があることに注意する必要があります。この国際規格は、サプライヤー/メーカーが代替の機器やエンジニアリング ソリューションを提供したり、ユーザー/購入者が受け入れることを禁止するものではありません。これは、革新的なテクノロジーや発展途上のテクノロジーがあるwhere 特に当てはまります。代替案が提供される場合、ベンダーは ISO 15136-2 のこの部分からの差異を特定し、詳細を提供する必要があります。
Introduction
This part of ISO 15136 has been developed by users/purchasers and suppliers/manufacturers of progressing cavity pump surface-drive systems and is intended for use in the petroleum and natural gas industry worldwide. ISO 15136-2 provides requirements and information to both parties in the selection, manufacturing, testing, and using progressing cavity pump surface-drive systems as defined in the scope. Further, ISO 15136-2 addresses supplier requirements, which set the minimum parameters with which suppliers shall comply to claim conformity with this International Standard.
ISO 15136-2 has been structured to allow for grades of increased requirements in quality control documentation. These variations allow the user/purchaser to select the grade that is required for a specific application.
There are two quality control documentation grades, which provide the user/purchaser the choice of requirements to meet their preference or application. Quality control documentation grade Q2 is the standard grade offered and quality control documentation grade Q1 provides additional documentation. Additional requirements can be specified by the user/purchaser as supplemental requirements.
Users of this International Standard should be aware that requirements above those outlined in this International Standard may be needed for individual applications. This International Standard is not intended to inhibit a supplier/manufacturer from offering, or the user/purchaser from accepting, alternative equipment or engineering solutions. This may be particularly applicable where there is innovative or developing technology. Where an alternative is offered, the vendor should identify any variations from this part of ISO 15136-2 and provide details.