※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自発的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 17, 鉄鋼、小委員会 SC 12, 連続ミル フラット圧延製品によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 15177:2012) を取り消して置き換えるものです。
前作からの主な変更点は以下の通り。
- 完全な編集上の改訂。
1 スコープ
この文書は、商業品質の熱間圧延双ロール鋳鋼板の要件を規定しています。
この製品は、酸化物またはスケールの存在、または酸化物またはスケールの除去後に明らかになった通常の表面欠陥が問題にならない用途を対象としています。表面が最も重要なアプリケーションには適していません。
この文書は、その後の圧延を受ける鋼板を対象としていません。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 6892-1, 金属材料 — 引張試験 — 1: 室温での試験方法
- ISO 16160, 熱間圧延鋼板製品 - 寸法および形状の公差
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
熱間圧延双ロール鋳鋼板
必要なシートの厚さと公差を得るための双ロール プロセスから得られる製品
3.2
熱延スケール除去鋼板
酸溶液中での酸洗いによって、酸化物またはスケールが除去された熱間圧延鋼板。
注記1:スケール除去は、グリットブラストなどの機械的方法でも行うことができます。スケール除去により、特性が変化する場合があります 。
3.3
スキンパス
製品の軽い冷間圧延
注記1スキンパッシングの目的は、次のうちの1つまたは複数です。形状を制御します。必要な表面仕上げを得るためです。
注記2:スキンパスにより、硬度がいくらか増加し、延性がいくらか失われる。
3.4
ミルエッジ
熱間圧延で生成される明確な輪郭のない通常の側面エッジ
注記 1:ミルエッジには、ひび割れや裂け目、または薄い (フェザリング) エッジなどの不規則性が含まれる場合があります。
3.5
せん断エッジ
ミルエッジ製品をせん断、スリット、またはトリムすることによって得られる通常のエッジ
注記 1通常の加工では、スリットバリの明確な位置が得られるとは限りません。
3.6
双ロール鋳鋼板
最終的な厚さを達成するための最小限の熱間圧延で、液体金属から直接、ほぼ最終的な厚さまで鋳造することによって製造された鋼板。
3.7
多く
同じ厚さおよび状態に圧延された同じ指定の鋼板の指定された量まで
参考文献
| [1] | ASTM A1039/A1039M-10, スチール、シート、熱間圧延、カーボン、商業用、構造用、および高強度の低合金および超高強度の標準仕様、ツインロール鋳造プロセスで製造 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 12, Continuous mill flat rolled products.
This second edition cancels and replaces the first edition (ISO 15177:2012), which has been technically revised.
The main changes compared to the previous edition are as follows:
- complete editorial revision.
1 Scope
This document specifies the requirements for hot-rolled twin-roll cast steel sheet of commercial quality.
The product is intended for applications where the presence of oxide or scale or normal surface imperfections disclosed after removal of oxide or scale are not objectionable. It is not suitable for applications where the surface is of prime importance.
This document does not cover steel sheet that is subjected to subsequent rolling.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 6892-1, Metallic materials — Tensile testing — 1: Method of test at room temperature
- ISO 16160, Hot-rolled steel sheet products — Dimensional and shape tolerances
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
hot-rolled twin-roll cast steel sheet
product resulting from the twin-roll process to obtain the required sheet thickness and tolerances
3.2
hot-rolled descaled steel sheet
hot-rolled steel sheet from which oxide or scale has been removed, commonly by pickling in an acid solution
Note 1 to entry: Descaling can also be performed by mechanical methods, such as grit blasting. Some change in properties can result from descaling .
3.3
skin pass
light cold rolling of the product
Note 1 to entry: The purpose of the skin passing is one or more of the following: to minimize the appearance of coil breaks, stretcher strains and fluting; to control the shape; and to obtain the required surface finish.
Note 2 to entry: Some increase in hardness and some loss in ductility will result from skin passing.
3.4
mill edge
normal side edge without any definite contour produced in hot rolling
Note 1 to entry: Mill edges can contain some irregularities, such as cracked or torn edges or thin (feathered) edges.
3.5
sheared edge
normal edge obtained by shearing, slitting, or trimming a mill edge product
Note 1 to entry: Normal processing does not necessarily provide a definite position of the slitting burr.
3.6
twin-roll cast steel sheet
steel sheet produced by casting to near final thickness directly from the liquid metal with minimal hot rolling to achieve the final thickness
3.7
lot
up to a specified quantity of steel sheet of the same designation rolled to the same thickness and condition
Bibliography
| [1] | ASTM A1039/A1039M-10, Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process |