ISO 15320:2011 パルプ、紙、ボード—水性抽出物中のペンタクロロフェノールの測定 | ページ 2

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

序文

ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。

国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.

技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。

このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。

ISO 15320 は、技術委員会 ISO/TC 6, 紙、板紙およびパルプによって作成されました。

この第 2 版は、技術的に改訂された第 1 版 (ISO 15320:2003) を取り消して置き換えるものです。

警告 — この国際規格の使用には、有毒物質であるメタノールやペンタクロロフェノール、腐食性の無水酢酸などの有害物質が含まれる場合があります。この国際規格は、その使用に関連するすべての安全および環境問題に対処しているわけではありません。この国際規格の使用者は、使用前に適切な安全、健康、および環境慣行を確立し、安全規則の適用可能性を判断する責任があります。

1 スコープ

この国際規格は、パルプ、紙および板紙の水性抽出物中のペンタクロロフェノール (PCP) を測定するための試験方法を規定しています。食品と接触する紙・板紙用に開発されましたが、あらゆるパルプ・紙・板紙に適用できます。

アセチル化の作業範囲は 0.05 mg/kg ~ 0.5 mg/kg です。

注記水性抽出物を希釈すると、作業範囲の上限が増加する可能性があります。

2 参考文献

本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。

  • ISO 186, 紙と板紙 — 平均品質を決定するためのサンプリング
  • ISO 536, 紙および板紙 — 坪量の決定
  • ISO 638, 紙、板紙およびパルプ — 乾物含有量の測定 — オーブン乾燥法
  • ISO 7213, パルプ — テスト用のサンプリング
  • ISO 3696, 分析ラボ用水 — 仕様および試験方法

参考文献

[1]ISO 1042, 実験用ガラス器具 — ワンマークのメスフラスコ
[2]ISO 1773, 実験用ガラス器具 — 細口沸騰フラスコ
[3]ISO 6556, 実験用ガラス器具 — フィルターフラスコ
[4]EN 645, 食品と接触することを意図した紙および板紙 - 冷水抽出物の調製
[5]EN 647, 食品と接触することを意図した紙および板紙 — 熱水抽出物の調製

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 15320 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps.

This second edition cancels and replaces the first edition (ISO 15320:2003), which has been technically revised.

WARNING — The use of this International Standard may involve hazardous materials, e.g. methanol and pentachlorophenol, which are toxic substances, as well as acetic anhydride, which is corrosive. This International Standard does not address all the safety and environmental problems associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety, health and environmental practices and determine the applicability of safety regulations prior to use.

1 Scope

This International Standard specifies a test method for the determination of pentachlorophenol (PCP) in an aqueous extract of pulp, paper and board. Although it was developed for paper and board intended to come into contact with foodstuffs, it is applicable to all kinds of pulp, paper and board.

The working range for acetylation is 0,05 mg/kg to 0,5 mg/kg.

NOTE The upper limit of the working range could be increased if the aqueous extract is diluted.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

  • ISO 186, Paper and board — Sampling to determine average quality
  • ISO 536, Paper and board — Determination of grammage
  • ISO 638, Paper, board and pulps — Determination of dry matter content — Oven-drying method
  • ISO 7213, Pulps — Sampling for testing
  • ISO 3696, Water for analytical laboratory use — Specification and test methods

Bibliography

[1]ISO 1042, Laboratory glassware — One-mark volumetric flasks
[2]ISO 1773, Laboratory glassware — Narrow-necked boiling flasks
[3]ISO 6556, Laboratory glassware — Filter flasks
[4]EN 645, Paper and board intended to come into contact with foodstuffs — Preparation of a cold water extract
[5]EN 647, Paper and board intended to come into contact with foodstuffs — Preparation of a hot water extract