この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、ISO 13623 で定義されているように、石油および天然ガス産業のパイプライン輸送システムで使用する誘導曲げプロセスによって作成された曲げの技術的な納入条件を指定します。
このドキュメントは、非合金鋼または低合金鋼のシームレスおよび溶接パイプから作られた誘導曲げに適用されます。
注これらは通常、ISO 3183 に準拠したライン パイプの対応するレベルとグレードに適した C-Mn 鋼または低合金鋼です。
この文書は、ISO 3183 でパイプに与えられた製品仕様レベルに対応する誘導曲げの 2 つの製品仕様レベル (PSL) の製造に関する要件を指定します。
このドキュメントは、誘導曲げ PSL の選択には適用されません。使用目的と設計要件に基づいて、PSL を指定するのは購入者の責任です。 ISO 3183, はじめにも参照してください。
このドキュメントは、他の製造プロセスで作成されたパイプライン ベンドには適用されません。
1 Scope
This document specifies the technical delivery conditions for bends made by the induction bending process for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.
This document is applicable to induction bends made from seamless and welded pipe of unalloyed or low-alloy steels.
NOTE These are typically C-Mn steels or low-alloy steels that are appropriate for the corresponding level and grade of line pipe in accordance with ISO 3183.
This document specifies the requirements for the manufacture of two product specification levels (PSLs) of induction bends corresponding to product specification levels given for pipe in ISO 3183.
This document is not applicable to the selection of the induction bend PSL. It is the responsibility of the purchaser to specify the PSL, based upon the intended use and design requirements; see also ISO 3183, Introduction.
This document is not applicable to pipeline bends made by other manufacturing processes.