この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました 。 www.iso.org/directives
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます。 www.iso.org/patents
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
この文書を担当する委員会は ISO/TC 42, 写真です。
この第 3 版は、第 2 版 (ISO 15740:2008) を廃止し、置き換えるものであり、次の変更を加えたマイナー改訂版となります。
- 以前 I3A によって管理されていたベンダー拡張 ID レジストリが別の組織に移管されたため、用語 3.21 (I3A) は削除され、残りの用語の番号が付け直されました。
- 9.5.1 では、新しい組織が VendorExtensionID を割り当てて維持することを反映するために、4 番目と 5 番目の文が修正されて結合されました。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
The committee responsible for this document is ISO/TC 42, Photography.
This third edition cancels and replaces the second edition (ISO 15740:2008), of which it constitutes a minor revision with the following changes:
- as the vendor extension ID registry formerly maintained by the I3A has been transferred to another organization, term 3.21 (I3A) was removed and the remaining terms renumbered;
- 9.5.1, the fourth and fifth sentences were amended and combined to reflect that a new organization assigns and maintains VendorExtensionIDs.