この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、石油および天然ガス産業用途向けの一連のコンパクト スチール ゲート、グローブ、およびチェック バルブの要件を指定します。
以下のバルブに適用できます。
- 公称サイズ DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100,
- 公称パイプサイズ NPS ¼、⅜、½、¾、1, 1¼、1½、2, 2½、3, および 4 に対応。
- 圧力指定 PN 16, 25, 40, 63, 100, 250, 400, および
- 圧力指定クラス 150, 300, 600, 800, 1500, および 250
クラス 800 はリストされたクラス指定ではありませんが、このドキュメントでカバーされているソケット溶接およびねじ付きエンド コンパクト バルブに広く使用されている中間クラス番号です。同等の PN 指定はありません。
この文書には、次のバルブ特性に関する規定が含まれています。
- 上昇ステム付き外側スクリュー (OS & Y): サイズ 8 ≤ DN ≤ 100;
- ライジングステム付き内側スクリュー (ISRS): サイズ 8 ≤ DN ≤ 65, 圧力指定 PN ≤ 100 またはクラス ≤ 800;
- 差込み溶接またはねじ込み端: サイズ 8 ≤ DN ≤ 65;
- クラス 800 のフランジ付きエンドを除く、フランジ付きまたは突合せ溶接エンド。
- ボルト締め、溶接、またはシール溶接でねじ止めされたボンネットジョイント構造。
- 圧力指定 PN ≤ 45 またはクラス ≤ 800 のユニオン ナットを使用するボンネット ジョイント構造。
- ボディシートの開口部;
- 材料: 指定どおり;
- テストと検査。
この文書は、EN 1092-1 および ASME B16.5 に準拠したバルブ エンド フランジと、ISO 7-1 または ASME B1.20.1 に準拠したテーパー パイプ スレッドを備えたバルブ ボディ エンドを対象としています。これは、圧力指定クラス 800 およびクラス 1 500 のサイズ 15 ≤ DN ≤ 50 の拡張本体構造、およびサイズ 8 ≤ DN ≤ 50 のゲートまたはグローブ バルブに適合するベローズおよびベローズ アセンブリ構造に適用できます。また、ベローズの要件もカバーされています。ステムシールタイプのテスト。
1 Scope
This document specifies the requirements for a series of compact steel gate, globe and check valves for petroleum and natural gas industry applications.
It is applicable to valves of:
- nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80 and 100,
- corresponding to nominal pipe sizes NPS ¼, ⅜, ½, ¾, 1, 1¼, 1½, 2, 2½, 3 and 4,
- pressure designations PN 16, 25, 40, 63, 100, 250 and 400, and
- pressure designations Class 150, 300, 600, 800, 1 500 and 2 500.
Class 800 is not a listed class designation, but is an intermediate Class number widely used for socket welding and threaded end compact valves covered by this document. There is no equivalent PN designation.
This document includes provisions for the following valve characteristics:
- outside screw with rising stems (OS & Y): in sizes 8 ≤ DN ≤ 100;
- inside screw with rising stems (ISRS): in sizes 8 ≤ DN ≤ 65 with a pressure designation PN ≤ 100 or Class ≤ 800;
- socket welding or threaded ends: in sizes 8 ≤ DN ≤ 65;
- flanged or butt-welding ends excluding flanged end Class 800;
- bonnet joint construction that is bolted, welded or threaded with seal weld;
- bonnet joint construction that uses a union nut with a pressure designation PN ≤ 45 or Class ≤ 800;
- body seat openings;
- materials: as specified;
- testing and inspection.
This document covers valve end flanges in accordance with EN 1092-1 and ASME B16.5 and valve body ends having tapered pipe threads in accordance with ISO 7-1 or ASME B1.20.1. It is applicable to extended body construction in sizes 15 ≤ DN ≤ 50 with pressure designations Class 800 and Class 1 500 and to bellows and bellows assembly construction adaptable to gate or globe valves in sizes 8 ≤ DN ≤ 50. Also covered are requirements for bellows stem seal type testing.