この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
ISO 15874 のこの部分は、人の消費用 (家庭用システム) および暖房システム用であるかどうかにかかわらず、建物内の温水および冷水設備に使用することを目的としたポリプロピレン (PP) 配管システムの継手の特性を指定しています。アプリケーションのクラスに応じた設計圧力および温度下で (ISO 15874-1:2013, 表 1 を参照)
さまざまな使用条件 (アプリケーション クラス) と設計圧力クラスをカバーしています。 ISO 15874-1:2013 の表 1 の値を超えるT D 、 T maxおよびT malの値は適用されません。
注記これらの側面から適切な選択を行うことは、購入者または指定者の責任であり、それらの特定の要件および関連する国内規制および設置慣行またはコードを考慮に入れる必要があります。
また、ISO 15874 のこの部分で参照されている試験方法のパラメータも指定します。
ISO 15874 の他の部分と併せて、ISO 15874 のこの部分は、温水および冷水設備用の ISO 15874-2 に準拠したパイプに取り付けることを意図した、PP 製の継手および他の材料製の継手に適用されます。これにより、ジョイントは ISO 15874-5 の要件に準拠しています。
ISO 15874 のこの部分は、次のタイプの継手に適用されます。
- ソケットフュージョンフィッティング;
- 電気融合フィッティング;
- 機械的付属品;
- インサートが組み込まれたフィッティング。
また、ISO 15874-2 に準拠したパイプに取り付けた場合、ISO 15874-5 の要件に準拠した代替材料で作られた継手にも適用できます。
1 Scope
This part of ISO 15874 specifies the characteristics of fittings for polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems under design pressures and temperatures according to the class of application (see ISO 15874-1:2013, Table 1).
It covers a range of service conditions (application classes) and design pressure classes. For values of TD, Tmax and Tmal in excess of those in Table 1 of ISO 15874-1:2013 do not apply.
NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
It also specifies the parameters for the test methods referred to in this part of ISO 15874.
In conjunction with the other parts of ISO 15874, this part of ISO 15874 is applicable to fittings made from PP and to fittings made from other materials which are intended to be fitted to pipes conforming to ISO 15874-2 for hot and cold water installations, whereby the joints conform to the requirements of ISO 15874-5.
This part of ISO 15874 is applicable to fittings of the following types:
- socket fusion fittings;
- electro fusion fittings;
- mechanical fittings;
- fittings with incorporated inserts.
It is also applicable to fittings made from alternative materials which when fitted to pipes conforming to ISO 15874-2, conform to the requirements of ISO 15874-5.