※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
適合性評価に関連する ISO 固有の用語や表現の意味の説明、および貿易の技術的障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください。 序文 - 補足情報
この文書を担当する委員会は、ISO/TC 146, 大気質、小委員会 SC 6, 室内空気です。
ISO 16000 は、一般タイトル「室内空気」の下に、次の部分で構成されています。
- Part 1: サンプリング戦略の一般的な側面
- Part 2: ホルムアルデヒドのサンプリング戦略
- Part 3: 室内空気および試験室空気中のホルムアルデヒドおよびその他のカルボニル化合物の測定 — アクティブサンプリング法
- Part 4: ホルムアルデヒドの測定 — 拡散サンプリング法
- Part 5: 揮発性有機化合物 (VOC) のサンプリング戦略
- Part 6: Tenax TA ®吸着剤でのアクティブサンプリング、加熱脱離、および MS または MS-FID を使用したガスクロマトグラフィーPart 室内および試験室の空気中の揮発性有機化合物の測定
- Part 7: 浮遊アスベスト繊維濃度を決定するためのサンプリング戦略
- Part 8: 換気条件を特徴付けるための建物内の空気の局所平均年齢の決定
- Part 9: 建築製品および家具からの揮発性有機化合物の排出量の測定 — 排出試験室法
- Part 10: 建築製品および家具からの揮発性有機化合物の放出の測定 — 放出試験セル法
- Part 11: 建築製品および家具からの揮発性有機化合物の放出の測定 — サンプリング、サンプルの保管、および試験片の調製
- Part 12: ポリ塩化ビフェニル (PCB)、ポリ塩化ジベンゾ-p-ダイオキシン (PCDD)、ポリ塩化ジベンゾフラン (PCDF)、および多環芳香族炭化水素 (PAH)Part サンプリング戦略
- Part 13: 総 (気体相および粒子相) ポリ塩化ダイオキシン様ビフェニル (PCB) およびポリ塩化ジベンゾ-p-ジオキシン/ジベンゾフラン (PCDD/PCDF) の定量 — 吸着剤付きフィルターでの収集
- Part 14: 総 (気相および粒子相) ポリ塩化ダイオキシン様ビフェニル (PCB) およびポリ塩化ジベンゾ-p-ジオキシン/ジベンゾフラン (PCDD/PCDF) の定量 — 高分解能ガスクロマトグラフィーおよび高分解能ガスクロマトグラフィーによる抽出、精製および分析質量分析
- Part 15: 二酸化窒素 (NO2)のサンプリング戦略
- Part 16: カビの検出と計数 — 濾過によるサンプリング
- Part 17: カビの検出と計数 — 培養ベースの方法
- Part 18: カビの検出と数え上げ — 衝突によるサンプリング
- Part 19: 金型のサンプリング戦略
- Part 21: カビの検出と数え上げ — 材料からのサンプリング
- Part 23: 吸着性建材によるホルムアルデヒド濃度の低減を評価するための性能試験
- Part 24: 吸着性建材による揮発性有機化合物 (ホルムアルデヒドを除く) 濃度の低減を評価するための性能試験
- Part 25: 建築製品による半揮発性有機化合物の排出量の測定 — マイクロチャンバー法
- Part 26: 二酸化炭素 (CO2)のサンプリング戦略
- Part 28:試験室を使用した建築製品からの臭気放出の測定
- Part 29: VOC 検知器の試験方法
- Part 30: 室内空気の官能検査
- Part 31: 有機リン化合物ベースの難燃剤および可塑剤の測定 — リン酸エステル
- Part 32: 汚染物質およびその他の有害な要因に関する建物の調査 — 検査
- 以下の部分が準備中です。
- Part 33: ガスクロマトグラフィー/質量分析 (GC/MS) によるフタル酸エステルの定量
- Part 34: 浮遊粒子状物質 (PM 2.5 分率) の測定戦略
- Part 35: ポリ臭素化ジフェニルエーテル、ヘキサブロモシクロドデカン、ヘキサブロモベンゼンの測定
- Part 36回 試験室を用いた空気清浄機による浮遊菌の減少率の試験方法
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 146, Air quality, Subcommittee SC 6, Indoor air.
ISO 16000 consists of the following parts, under the general title Indoor air:
- Part 1: General aspects of sampling strategy
- Part 2: Sampling strategy for formaldehyde
- Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method
- Part 4: Determination of formaldehyde — Diffusive sampling method
- Part 5: Sampling strategy for volatile organic compounds (VOCs)
- Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA®sorbent, thermal desorption and gas chromatography using MS or MS-FID
- Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
- Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions
- Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method
- Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method
- Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens
- Part 12: Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs)
- Part 13: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) — Collection on sorbent-backed filters
- Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) — Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry
- Part 15: Sampling strategy for nitrogen dioxide (NO2)
- Part 16: Detection and enumeration of moulds — Sampling by filtration
- Part 17: Detection and enumeration of moulds — Culture-based method
- Part 18: Detection and enumeration of moulds — Sampling by impaction
- Part 19: Sampling strategy for moulds
- Part 21: Detection and enumeration of moulds — Sampling from materials
- Part 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials
- Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials
- Part 25: Determination of the emission of semi-volatile organic compounds by building products — Micro-chamber method
- Part 26: Sampling strategy for carbon dioxide (CO2)
- Part 28: Determination of odour emissions from building products using test chambers
- Part 29: Test methods for VOC detectors
- Part 30: Sensory testing of indoor air
- Part 31: Measurement of flame retardants and plasticizers based on organophosphorus compounds — Phosphoric acid ester
- Part 32: Investigation of buildings for pollutants and other injurious factors — Inspections
- The following parts are under preparation:
- Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS)
- Part 34: Strategies for the measurement of airborne particles (PM 2,5 fraction)
- Part 35: Measurement of polybrominated diphenylether, hexabromocyclododecane and hexabromobenzene
- Part 36: Test method for the reduction rate of airborne bacteria by air purifiers using a test chamber