この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
このドキュメントでは、振動トランスデューサの入出力特性を記述する数学モデルで使用されるパラメータの推定に関する用語と方法、およびそれぞれのパラメータの不確かさを規定しています。記載されている方法は、ISO 16063-11, ISO 16063-13, ISO 16063-21, および ISO 16063-22 に従って標準的な校正手順で収集された校正データに基づいてパラメーターを推定します。この仕様は、これらの国際規格の既存の手順と定義の拡張として提供されています。記載されている推定の不確かさは、ISO/IEC Guide 98-3 および ISO/IEC Guide 98-3/補足 1 によって確立された方法に準拠しています。
このドキュメントで説明されている新しい特性評価は、衝撃などの広帯域/過渡入力を使用するキャリブレーションおよび測定アプリケーションの品質を向上させることを目的としています。これは、過渡入力に対する振動トランスデューサの応答の特性評価の手段を提供し、したがって、取得した出力信号からの入力の予測を使用して過渡振動信号を正確に測定するための基礎を提供します。前述のアプリケーション分野で使用される加速度計の校正データは、ISO 16063-13 およびISO 16063-2
1 Scope
This document prescribes terms and methods on the estimation of parameters used in mathematical models describing the input/output characteristics of vibration transducers, together with the respective parameter uncertainties. The described methods estimate the parameters on the basis of calibration data collected with standard calibration procedures in accordance with ISO 16063-11, ISO 16063-13, ISO 16063-21 and ISO 16063-22. The specification is provided as an extension of the existing procedures and definitions in those International Standards. The uncertainty estimation described conforms to the methods established by ISO/IEC Guide 98-3 and ISO/IEC Guide 98-3/Supplement 1.
The new characterization described in this document is intended to improve the quality of calibrations and measurement applications with broadband/transient input, like shock. It provides the means of a characterization of the vibration transducer’s response to a transient input and, therefore, provides a basis for the accurate measurement of transient vibrational signals with the prediction of an input from an acquired output signal. The calibration data for accelerometers used in the aforementioned field of applications should additionally be evaluated and documented in accordance with the methods described below, in order to provide measurement capabilities and uncertainties beyond the limits drawn by the single value characterization given by ISO 16063-13 and ISO 16063-22.