この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
3 用語と定義
このドキュメントの目的のために、ISO 10209 および以下に記載されている用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1 一般的な用語と定義
3.1.1
絶対座標系
その CAD モデルのデジタル要素の位置を定義するために使用される、アクティブな CAD モデルの初期モデル座標系
注記 1:アクティブな CAD モデルは、部品、サブアセンブリ、またはアセンブリの場合があります。
注記 2:この絶対座標系は、0,0,0 の絶対原点を持っています。
3.1.2
オフセット部
まっすぐな切断面にないフィーチャを含む階段状の切断面
注記 1: 2D オフセット断面図は、オフセットが 1 つの平面上にあるかのように描かれ、オフセットは断面図に表示されません。 3D オフセット断面図は、パーツをオフセットして切断することによって表示されます。
3.1.3
製品定義データ セット
データセット
製品の物理的および機能的要件を、グラフィックまたはテキスト表示、またはその両方の組み合わせによって (直接または参照によって) 開示する 1 つまたは複数のコンピューター ファイルのコレクション
3.1.4
ユーザー定義の座標系
絶対座標系に加えて、ユーザーが CAD モデルで作成したモデル座標系
3.2 図面およびデータセットの分類コード (付録 B を参照)
3.2.1
分類コード
図面、データ セット、またはその両方に含まれるデータを定義する製品定義データに割り当てられた名称
注記 1:図面は、物理的または電子的な形式のいずれでもかまいません。
3.2.2
分類コード 1
オプションのデータ セットを使用した描画
注記1分類コード1は、データ要素が図面上にあり、図面がオリジナルであることを識別します。
3.2.3
分類コード 2
仕様を含む設計モデルと図面を含むデータ セット
注記1分類コード2は、データ要素が図面上にあり、その図面がオリジナルであることを識別します。図面のグラフィックシートとモデルを作成するためのツールとしてコンピューターが使用されます。データ要素は、デジタル データと図面に配置されます。提供されたモデルは、図面を補足するものです。
3.2.4
分類コード 3
設計モデルまたは注釈付きモデルと簡略化された図面を含むデータ セット
注記 1分類コード 3 は、共通部品の特徴の伝達を促進し、非幾何学的部品の定義を定義するために使用される単純化された図面を持つモデルを識別します。データセットはオリジナルです。たとえば、この要件を満たすには、モデルと図面を一緒に使用する必要があります。
注記 2:分類コード 3 の注釈付きモデルを使用すると、部分的に注釈が付けられます。
3.2.5
分類コード 4
注釈付きのモデルと図面を含むデータ セット
注記1分類コード4は、すべてのデータ要素がデジタルデータと図面の両方にあることを識別します。データセットはオリジナルです。たとえば、モデルまたは図面を個別に使用して、この要件を満たすことができます。
3.2.6
分類コード 5
注釈付きモデルを含むデータセット
注記1分類コード5は、すべてのデータ要素がモデルを含むデータセットにあることを識別します。図面がありません。
参考文献
| [1] | ISO 286-1, 製品の幾何学的仕様 (GPS) — 線形サイズの公差に関する ISO コード システム — Part 1: 公差、偏差、適合の基礎 |
| [2] | ISO 5456-2, 技術図面 — 投影法 — Part 2: 正投影表現 |
| [3] | ISO 6433, 技術製品ドキュメント — Partリファレンス |
| [4] | ISO 14405-1, 幾何学的製品仕様 (GPS) — 寸法公差 — Part 1: 線形サイズ |
| [5] | ISO 14405-2, 幾何学的製品仕様 (GPS) — 寸法公差 — Part 2: 直線または角度サイズ以外の寸法 |
| [6] | ISO 16016, 技術製品文書 — 文書および製品の使用を制限するための保護通知 |
| [7] | ASME Y14.41:2012, デジタル製品定義データ プラクティス |
| [8] | ASME Y14.100エンジニアリング ドローイング プラクティス |
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 10209 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1 General terms and definitions
3.1.1
absolute coordinate system
initial model coordinate system in the active CAD model used to define the location of digital elements in that CAD model
Note 1 to entry: The active CAD model may be a part, subassembly or assembly.
Note 2 to entry: This absolute coordinate system has absolute origin of 0,0,0.
3.1.2
offset section
stepped cutting plane to include features not located in a straight cutting plane
Note 1 to entry: 2D offset section views are drawn as if the offsets were in one plane, and the offsets are not indicated in any manner in the section views. 3D offset section views are shown by cutting through the part in an offset manner.
3.1.3
product definition data set
data set
collection of one or more computer files that discloses (directly or by reference), by means of graphic or textual presentations, or combinations of both, the physical and functional requirements of a product
3.1.4
user-defined coordinate system
model coordinate system which is created in the CAD model by the user in addition to the absolute coordinate system
3.2 Classification codes for drawings and data sets (see Annex B)
3.2.1
classification code
designation assigned to product definition data that defines what data are included within the drawing, data set or both
Note 1 to entry: A drawing can be in either physical or electronic format.
3.2.2
classification code 1
drawing with optional data set
Note 1 to entry: Classification code 1 identifies that the data elements are located on the drawing and the drawing is the original.
3.2.3
classification code 2
data set with design model and drawing containing specifications
Note 1 to entry: Classification code 2 identifies that data elements are located on a drawing and the drawing is the original. A computer is used as a tool to prepare the drawing graphics sheet and the model. Data elements are located in the digital data and the drawing. The model when provided is supplementary to the drawing.
3.2.4
classification code 3
data set with design model or annotated model and simplified drawing
Note 1 to entry: Classification code 3 identifies a model with a simplified drawing used to expedite communication of common part features and to define non-geometric part definitions. The data set is the original. For example, the model and the drawing must be used together to satisfy this requirement.
Note 2 to entry: When used, annotated models under classification code 3 are partially annotated.
3.2.5
classification code 4
data set with annotated model and drawing
Note 1 to entry: Classification code 4 identifies that all data elements are located in both the digital data and the drawing. The data set is the original. For example, the model or the drawing can be used individually to satisfy this requirement.
3.2.6
classification code 5
data set with annotated model
Note 1 to entry: Classification code 5 identifies that all data elements are located in the data set with model. No drawing exists.
Bibliography
| [1] | ISO 286-1, Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits |
| [2] | ISO 5456-2, Technical drawings — Projection methods — Part 2: Orthographic representations |
| [3] | ISO 6433, Technical product documentation — Part references |
| [4] | ISO 14405-1, Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes |
| [5] | ISO 14405-2, Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes |
| [6] | ISO 16016, Technical product documentation — Protection notices for restricting the use of documents and products |
| [7] | ASME Y14.41:2012, Digital Product Definition Data Practices |
| [8] | ASME Y14.100, Engineering Drawing Practices |