※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 16794 は、技術委員会 ISO/TC 85, 原子力エネルギー、小委員会 SC 5, 核燃料技術によって作成されました。
1 スコープ
この国際規格は、六フッ化ウラン (UF 6 ) に不純物として含まれる炭化水素、クロロカーボン、および部分的または完全に置換されたハロカーボンまたはハロ炭化水素を赤外 (IR) 分光分析法によって測定するための試験方法を規定しています。
この方法は、UF 6による干渉を伴う IR 線を発する化合物 (CF 4など) には使用できません。
試験方法は定量的で、不純物の種類に応じて 0.000 1% または 0.001 0% から 0.100% までのモル分率で適用できます。
この試験方法は、フッ化水素酸 (HF) およびフッ化物として存在するいくつかの元素の測定にも使用できます。 BF 3にはホウ素、SiF 4にはシリコン、PF 5にはリン、MoF 6にはモリブデン、WF 6にはタングステンが含まれます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16794 was prepared by Technical Committee ISO/TC 85, Nuclear energy, Subcommittee SC 5, Nuclear fuel technology.
1 Scope
This International Standard specifies a test method for the determination of hydrocarbons, chlorocarbons and partially or completely substituted halocarbons or halohydrocarbons contained as impurities in uranium hexafluoride (UF6) by infrared (IR) spectrometry.
This method cannot be used for compounds giving IR rays with interference by UF6 (for example CF4).
The test method is quantitative and applicable in the mole fraction from 0,000 1 % or 0,001 0 %, depending on the type of impurity, up to 0,100 %.
The test method can also be used for the determination of hydrofluoric acid (HF) and several elements existing as fluorides; boron in BF3, silicon in SiF4, phosphorus in PF5, molybdenum in MoF6 and tungsten in WF6.