※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
ISO 16796 は、技術委員会 ISO/TC 85, 原子力エネルギー、原子力技術、および放射線防護、小委員会 SC 5, 原子力設備、プロセスおよび技術によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 16796:2004) を取り消して置き換えるものです。
1 スコープ
このドキュメントは、質量分率 10 g/kg から 100 g/kg の Gd 2 O 3 + UO 2および ((U, Gd) O 2 ) の粉末混合物および焼結ペレット中の Gd 2 O 3としてのガドリニウムの測定に適用できます。 (つまり、1% から 10%)、適切な ICP-AES 装置を使用します。
この方法論は、ユーザーが確立された測定管理プログラムの下で認定測定を実行し、測定の不確実性要件が仕様で望ましいレベルの信頼性で満たされることを実証した場合、合意された燃料仕様および関連するデータ品質目標への準拠を実証することができます。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3696, 分析ラボ用水 — 仕様および試験方法
3 用語と定義
このドキュメントには、用語と定義は記載されていません。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO/IEC Guide 98-3, 測定の不確かさ — 3: 測定における不確かさの表現の手引き (GUM:1995) |
| [2] | ISO/IEC 17025, 試験所および校正所の能力に関する一般要件 |
| [3] | ASTM C1128, 核燃料サイクル材料の分析に使用する作業標準物質の調製に関する標準ガイド |
| [4] | ANSI N15.51, 核物質管理方法に関する米国国家規格 - 測定管理プログラム - 核物質分析化学研究所 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
ISO 16796 was prepared by Technical Committee ISO/TC 85, Nuclear energy, nuclear technologies, and radiological protection, Subcommittee SC 5, Nuclear installations, processes and technologies.
This second edition cancels and replaces the first edition (ISO 16796:2004), which has been technically revised.
1 Scope
This document is applicable to the determination of gadolinium as Gd2O3 in powder blends and sintered pellets of Gd2O3 + UO2 and ((U, Gd) O2) from mass fraction 10 g/kg to 100 g/kg (i.e. 1 % to 10 %), using a suitable ICP-AES instrument.
This methodology is capable of demonstrating compliance with agreed upon fuel specifications and associated data quality objectives provided the user has performed qualification measurements under their established measurement control program to demonstrate that measurement uncertainty requirements will be met with the desired level of confidence at the specification.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3696, Water for analytical laboratory use — Specification and test methods
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO/IEC Guide 98-3, Uncertainty of measurement — 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| [2] | ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories |
| [3] | ASTM C1128, Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
| [4] | ANSI N15.51, American National Standard for Methods of Nuclear Material Control – Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory |