この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 2808, 塗料およびワニス - 膜厚の決定
- ISO 2812-1, 塗料およびワニス — 液体に対する耐性の測定 — Part 1: 水以外の液体への浸漬
- ISO 4624, 塗料およびワニス — 接着力の引き剥がし試験
- ISO 4628-2, 塗料およびワニス — コーティングの劣化の評価 — 欠陥の量とサイズ、および外観の均一な変化の強さの指定 — Part 2: 膨れの程度の評価
- ISO 4628-3, 塗料およびワニス — コーティングの劣化の評価 — 欠陥の量とサイズ、および外観の均一な変化の強さの指定 — Part 3: 錆びの程度の評価
- ISO 4628-4, 塗料およびワニス — コーティングの劣化の評価 — 欠陥の量とサイズ、および外観の均一な変化の強さの指定 — Part 4: 亀裂の程度の評価
- ISO 4628-5, 塗料およびワニス — コーティングの劣化の評価 — 欠陥の量とサイズ、および外観の均一な変化の強さの指定 — Part 5: 剥離の程度の評価
- ISO 702, 水質 - 濁度の測定
- ISO 8501-1, 塗料および関連製品を塗布する前の鋼基材の準備 — 表面清浄度の視覚的評価 — Part 1: コーティングされていない鋼基材および以前のコーティングを完全に除去した後の鋼基材の錆の程度と準備の程度
- ISO 8501-3, 塗料および関連製品を塗布する前の鋼基材の準備 — 表面清浄度の視覚的評価 — Part 3: 溶接部、エッジ、および表面欠陥のあるその他の領域の準備グレード
- ISO 8502-3, 塗料および関連製品を塗布する前の鋼基材の準備 — 表面の清浄度評価のための試験 — Part 3: 塗装のために準備された鋼表面上の粉塵の評価 (感圧テープ法)
- ISO 8502-6, 塗料および関連製品を塗布する前の鋼基材の準備 — 表面の清浄度評価のためのテスト — Part 6: 分析のための水溶性汚染物質の抽出 (ブレスル法)
- ISO 8502-9, 塗料および関連製品を塗布する前の鋼基材の準備 — 表面清浄度評価のための試験 — Part 9: 水溶性塩の導電率測定のためのフィールド法
- ISO 8503-2, 塗料および関連製品を塗布する前の鋼基材の準備 — ブラスト洗浄された鋼基材の表面粗さ特性 — Part 2: 研磨剤ブラスト洗浄された鋼の表面プロファイルのグレーディング方法 — 比較手順
- ISO 8503-5, 塗料および関連製品を塗布する前の鋼基材の準備 — ブラスト洗浄された鋼基材の表面粗さ特性 — Part 5: 表面プロファイルを測定するためのレプリカテープ法
- ISO 8573-1, 圧縮空気 — Part 1: 汚染物質と純度クラス
- ISO 1112, 塗料および関連製品を塗布する前の鋼基材の準備 — 金属ブラスト洗浄研磨材の仕様
- ISO 1112, 塗料および関連製品を塗布する前の鋼基材の準備 — 非金属ブラスト洗浄研磨材の仕様
- ISO 11127-7, 塗料および関連製品を塗布する前の鋼基材の準備 — 非金属ブラスト洗浄研磨材の試験方法
- ISO 12944-3, 塗料およびワニス — 保護塗料システムによる鉄骨構造の腐食保護 — Part 3: 設計上の考慮事項
- ISO 12944-9:2018, 塗料およびワニス — 保護塗料システムによる鋼構造物の腐食保護 — Part 9: 海洋および関連構造物のための保護塗料システムおよび実験室性能試験方法
- ISO 15234, 塗料およびワニス — ホルムアルデヒド放出コーティングおよびメラミンフォームの試験 — 小さな試験室におけるホルムアルデヒドの定常状態濃度の測定
- ISO 15711, 塗料およびワニス — 海水にさらされたコーティングの陰極剥離に対する耐性の測定
- ISO 19840, 塗料およびワニス — 保護塗装システムによる鉄骨構造の腐食保護 — 粗い表面上の乾燥膜の厚さの測定および合格基準
- ISO 29601, 塗料およびワニス — 保護塗料システムによる腐食保護 — 乾燥膜の多孔性の評価
- ISO 80000-1:2022, 数量と単位 - Part 1: 一般
- API RP 652, 地上石油貯蔵タンク底部のライニング
- API Std 653, タンクの検査、修理、改造および再構築
- API Std 2015, 石油貯蔵タンクの安全な立ち入りと洗浄に関する要件
- ASTM A380, ステンレス鋼部品、機器、およびシステムの洗浄、スケール除去、および不動態化に関する標準慣行
- ASTM D522, 付着した有機コーティングのマンドレル曲げ試験の標準試験方法
- ASTM D570, プラスチックの吸水性に関する標準試験方法
- ASTM D790, 非強化および強化プラスチックおよび電気絶縁材料の曲げ特性の標準試験方法
- ASTM D2240, ゴム特性の標準試験法 - デュロメータ硬度
- ASTM D2583, Barcol Impressor による硬質プラスチックの押し込み硬度の標準試験方法
- ASTM D4060, テーバー・アブレーダーによる有機コーティングの耐摩耗性の標準試験方法
- ASTM D4285, 圧縮空気中の油または水を示す標準試験方法
- ASTM D5402, 溶剤摩擦を使用した有機コーティングの耐溶剤性を評価するための標準手法
- ASTM D6943, 工業用保護コーティングおよびライニングの浸漬試験の標準実務
- ASTM F21, アトマイザー試験による疎水性表面フィルムの標準試験方法
- ASTM G42, 高温にさらされたパイプラインコーティングの陰極剥離の標準試験方法
- EN 1402, 補強材 - テキスタイル ガラス ロービングの仕様
- NACE TM0304, オフショアプラットフォームの大気およびスプラッシュゾーンメンテナンスコーティングシステムの評価
- NACE TM0404, オフショアプラットフォーム大気および飛沫ゾーン新C
- SSPC Guide 12, 工業用塗装プロジェクトの照明ガイド
- SSPC Guide 15, スチールおよびその他の非多孔質基材上の可溶性塩の検索および分析のためのフィールド方法
- 塗装マニュアル Vol SSPC, 1
- SSPC-SP 1, 鋼構造塗装協議会の表面処理仕様 - 溶剤洗浄
- SSPC-SP 11, 表面処理標準、地金に対する電動工具の洗浄
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 2808, Paints and varnishes — Determination of film thickness
- ISO 2812-1, Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
- ISO 4624, Paints and varnishes — Pull-off test for adhesion
- ISO 4628-2, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
- ISO 4628-3, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
- ISO 4628-4, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
- ISO 4628-5, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
- ISO 7027 (all parts), Water quality — Determination of turbidity
- ISO 8501-1, Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
- ISO 8501-3, Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
- ISO 8502-3, Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
- ISO 8502-6, Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of water soluble contaminants for analysis (Bresle method)
- ISO 8502-9, Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts
- ISO 8503-2, Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
- ISO 8503-5, Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
- ISO 8573-1, Compressed air — Part 1: Contaminants and purity classes
- ISO 11124 (all parts), Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives
- ISO 11126 (all parts), Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives
- ISO 11127-7, Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives
- ISO 12944-3, Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations
- ISO 12944-9:2018, Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
- ISO 15234, Paints and varnishes — Testing of formaldehyde-emitting coatings and melamine foams — Determination of the steady-state concentration of formaldehyde in a small test chamber
- ISO 15711, Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water
- ISO 19840, Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
- ISO 29601, Paints and varnishes — Corrosion protection by protective paint systems — Assessment of porosity in a dry film
- ISO 80000-1:2022, Quantities and units — Part 1: General
- API RP 652, Lining of Aboveground Petroleum Storage Tank Bottoms
- API Std 653, Tank Inspection, Repair, Alteration and Reconstruction
- API Std 2015, Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks
- ASTM A380, Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
- ASTM D522, Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
- ASTM D570, Standard Test Method for Water Absorption of Plastics
- ASTM D790, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D2240, Standard Test Method for Rubber Property—Durometer Hardness
- ASTM D2583, Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
- ASTM D4060, Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abrader
- ASTM D4285, Standard Test Method for Indicating Oil or Water in Compressed Air
- ASTM D5402, Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
- ASTM D6943, Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings
- ASTM F21, Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
- ASTM G42, Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
- EN 14020 (all parts), Reinforcements — Specification for textile glass roving’s
- NACE TM0304, Offshore Platform Atmospheric and Splash Zone Maintenance Coating System Evaluation
- NACE TM0404, Offshore Platform Atmospheric and Splash Zone New C
- SSPC Guide 12, Guide for Illumination of Industrial Painting Projects
- SSPC-Guide 15, Field Methods for Retrieval and Analysis of Soluble Salts on Steel and Other Nonporous Substrates
- Painting Manual Vol SSPC, 1
- SSPC-SP 1, Steel Structure Painting Council Surface Preparation Specifications — Solvent Cleaning
- SSPC-SP 11, Surface Preparation Standard, Power-Tool Cleaning to Bare Metal