この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
射撃音は、一般的に、銃口音、着弾音、発射音の 3 つの成分で構成されます。 ISO 17201 のこの部分は、発射体が超音速で移動する場合にのみ発生する発射音のみを扱います。
発射音の音源暴露レベルの算出方法を規定しています。また、他のソースからの音の伝播から逸脱する限り、発射音の伝播を計算するためのガイドラインも提供します。
発射体の音は、発射体の軌道上の特定の点、つまり「音源点」から発生すると説明されています。音源露出レベルは、幾何学的特性と弾道に沿った発射体の速度から計算されます。非線形効果の結果として、発射音曝露の周波数成分は、音源点からの距離に依存します。これは考慮されます。幾何学的減衰、非線形効果による減衰、および大気吸収を考慮して、受信機の位置での音響暴露レベルから音響暴露レベルを計算する方法についてのガイダンスが提供されます。さらに、発射体の速度の低下と大気の乱れの音響曝露レベルへの影響が考慮されます。
発射音の曝露レベルは、制限された領域であるマッハ領域 (領域ii — 箇条 4 を参照) における銃口の音の曝露レベルと比較して重要です。この領域の外では、マッハ領域よりもかなり低いレベルで、回折または散乱された発射音のみが受信されます。マッハ領域 (領域I ) の後方の発射音は、マズル音と比較して無視できます。 ISO 17201 のこの部分では、領域iiおよびIIIのレベルの計算スキームが提供されています。参考文献 [2] では、一連の口径と距離、つまりソース ポイントからレシーバーの位置までの測定値と計算値が比較されています。このセットでは、発射音を過大評価する傾向がわずかにあります。平均 1.8 dB, A 特性です。
Introduction
Shooting sound consists in general of three components: muzzle sound, impact sound and projectile sound. This part of ISO 17201 deals solely with projectile sound, which only occurs if the projectile moves with supersonic speed.
It specifies a method for calculating the source sound exposure level of projectile sound. It also gives guidelines for calculating the propagation of projectile sound as far as it deviates from the propagation of sound from other sources.
Projectile sound is described as originating from a certain point on the projectile trajectory, the “source point”. The sound source exposure level is calculated from the geometric properties and the speed of the projectile along the trajectory. As a result of non-linear effects, the frequency content of the projectile sound exposure depends on the distance from the source point. This is taken into account. Guidance is given on how the sound exposure level can be calculated from the sound exposure level at the receiver location, taking into account geometrical attenuation, attenuation due to the non-linear effects, and atmospheric absorption. In addition, the effects on the sound exposure level of the decrease of the projectile speed and of atmospheric turbulence are taken into account.
Projectile sound exposure levels are significant compared to the muzzle sound exposure level in a restricted region, the Mach region (region ii — see Clause 4). Outside this region only diffracted or scattered projectile sound is received, with considerably lower levels than in the Mach region. Projectile sound behind the Mach region (region I) is negligible compared to muzzle sound. In this part of ISO 17201, a computational scheme for the levels in regions ii and III is provided. In the bibliographical reference [2], measurements and calculations were compared for a set of calibres and distances, i.e. from the source point to the receiver location. For this set, there is a slight tendency of an overestimation of the projectile sound: on average 1,8 dB, A-weighted.