この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 27, 石炭およびコークス、小委員会 SC 4, サンプリングによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 18283:2006) を取り消して置き換えるものです。また、技術正誤表 ISO 18283:2006/Cor.1:2006 も組み込まれています。
主な変更点は次のとおりです。
- 断続的なサンプリングへの言及の削除。連続サンプリングのみが許可されます。
- 精度について議論する前に、バイアスを排除する必要性について議論します。
- 計算された増分数に関する個別のテーブルの削除。
- 基準増分質量表の削除。
- 石炭とコークスの最小サンプル質量のテーブルの分離。
- 大きなサイズの石炭とコークスの最小サンプル質量を減らすためのテーブルの削除。
- リスク評価が最初に実施され、このタイプのサンプリングが低速で移動するベルトまたは低流量でのみ許可される場合、移動するコンベアからの手動サンプリングを含める。さらに、より高い流量では、一次インクリメントを安全に収集できるようにするために、機械的な支援が必要です。
- 使用できるプローブの種類の制限。
- 手動サンプリング用オーガーの削除。
- ゲーテッド・リフルの写真が含まれています。
- 表 1, 2, および 4 の公称トップサイズを超える大型燃料のサンプリングは、実際的ではないため除外。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 27, Coal and Coke, Subcommittee SC 4, Sampling.
This second edition cancels and replaces the first edition (ISO 18283:2006), which has been technically revised. It also incorporates the Technical Corrigendum ISO 18283:2006/Cor.1:2006.
The main changes are as follows:
- Removal of any reference to intermittent sampling. Only continuous sampling is permitted.
- Discussion of the need to eliminate bias prior to discussing precision.
- Deletion of the separate tables on calculated numbers of increments.
- Deletion of the table on reference increment mass.
- Separation of tables for minimum sample masses for coal and coke.
- Removal of the table for reduced minimum sample mass for large sizes of coal and coke.
- Inclusion of manual sampling from a moving conveyor, provided a risk assessment is conducted at the outset and that this type of sampling is only permitted on a slow-moving belt or at low flow rates. Furthermore, at higher flow rates, mechanical assistance is necessary to ensure that primary increments can be collected safely.
- Restriction of the type of probes that can be used.
- Deletion of augers for manual sampling.
- Inclusion of a photograph of a gated riffle.
- Exclusion of sampling of large fuels in excess of the nominal top sizes in Tables 1, 2 and 4, because it is not practical.