ISO 19232-1:2013 非破壊検査— X線写真の画質—パート1：ワイヤータイプの画質インジケーターを使用した画質値の決定 | ページ 2

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 19232-1 was prepared by the European Committee for Standardization (CEN) in collaboration with ISO Technical Committee TC 135, Non-destructive testing, Subcommittee SC 5, Radiation methods, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

This second edition cancels and replaces the first edition (ISO 19232-1:2004), of which it constitutes a minor revision with the following changes:

• update of references and definitions;
• statement that EN wire IQIs of EN 462-1:1994^[1] and its designation are identical with ISO wire IQIs and its designation, as defined in this part of ISO 19232;
• replacement of film by detector, which includes film and digital detectors;
• addition of a new Annex for conversion of ASTM wire IQI identities to ISO wire IQI numbers.

It also incorporates the Technical Corrigendum, ISO 19232-1:2004/Cor. 1:2007.

ISO 19232 consists of the following parts under the general title Non-destructive testing — Image quality of radiographs:

• Part 1: Determination of the image quality value using wire-type image quality indicators
• Part 2: Determination of the image quality value using step/hole-type image quality indicators
• Part 3: Image quality classes
• Part 4: Experimental evaluation of image quality values and image quality tables
• Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators

1 Scope

This part of ISO 19232 specifies a device and a method for the determination of the image quality of radiographs using wire-type image quality indicators.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

Bibliography