この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装には特許の使用が含まれる可能性があることに注意を促します。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、ISO/TC 22 技術委員会、道路車両、SC 32 分科会、電気および電子部品および一般的なシステム側面によって作成されました。
ISO 19642 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
序章
この文書は ISO 19642 シリーズの既存の規格に追加されました。これは、ISO 自動車用電気ケーブル規格の一般的な構造を改善するための共同決議に従って作成されました。この新しい構造により明確さが増し、新しい標準ファミリーを定義することにより、将来の修正のための標準が開かれます。
現在、他の多くの規格が ISO 6722-1, ISO 6722-2, および ISO 14572 を参照しています。したがって、これらの規格は、少なくとも次に予定されている体系的レビューまで有効であり、後に ISO 19642 シリーズに置き換えられます。
新しい自動車ケーブル プロジェクトの場合、顧客とサプライヤーは ISO 19642 シリーズを使用することをお勧めします。
警告この文書の使用には、危険な物質、作業、および機器が含まれる可能性があります。この文書は、その使用に関連する安全上の懸念がある場合、そのすべてに対処することを目的とするものではありません。適切な安全対策を確立し、使用前に規制上の制限の適用可能性を判断するのは、この文書のユーザーの責任です。
1 スコープ
この文書は、 where システム電圧が 30 V AC または60Vdc
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 19642-1, 道路車両 — 自動車ケーブル —用語および設計ガイドライン
- ISO 19642-2: —1 、道路車両 — 自動車用ケーブル — 試験方法
- IEC 62153-4-3, 金属通信ケーブルの試験方法 - Part 4-3: 電磁両立性 (EMC) - 表面伝達インピーダンス - 三軸法
- IEC 62153-4-4 、メタリック通信ケーブルの試験方法 — Part 4-4: 電磁両立性 (EMC) — 3 GHz 以上の遮蔽減衰を測定するための試験方法、三軸法
- ASTM B452, 電子用途用銅被覆鋼線の標準仕様
- ASTM B105, 導体用硬伸銅合金線の標準仕様
- CEN/TS 13388, 銅および銅合金 - 組成および製品の概要
3 用語と定義
この文書の目的としては、ISO 19642-1 に記載されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 19642-3:2019, 道路車両 — 自動車ケーブル — Part 3: 30 V AC または 60 V DC 単心銅導体ケーブルの寸法と要件 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 32, Electrical and electronic components and general system aspects.
A list of all parts in the ISO 19642 series can be found on the ISO website.
Introduction
This document has been added to existing standards in the ISO 19642 series. It was prepared following a joint resolution to improve the general structure of the ISO automotive electric cable standards. This new structure adds more clarity and, by defining a new standard family, opens up the standard for future amendments.
Many other standards currently refer to ISO 6722-1, ISO 6722-2 and ISO 14572. Therefore, these standards will stay valid at least until the next scheduled systematic review and will be replaced later on by the ISO 19642 series.
For new automotive cable projects customers and suppliers are advised on using the ISO 19642 series.
WARNING The use of this document may involve hazardous materials, operations, and equipment. This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish appropriate safety practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This document specifies the dimensions and requirements for coaxial radio frequency (RF) cables with a specified analogue bandwidth up to 6 GHz (for special cases up to 20 GHz) intended for use in road vehicle applications where the nominal system voltage is 30 V a.c. or 60 V d.c.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 19642-1, Road vehicles — Automotive cables —Terminology and design guidelines
- ISO 19642-2:— 1 , Road vehicles — Automotive cables — Test methods
- IEC 62153-4-3, Metallic communication cable test methods — Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance — Triaxial method
- IEC 62153-4-4, Metallic communication cable test methods — Part 4-4: Electromagnetic compatibility (EMC) — Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method
- ASTM B452, Standard Specification for Copper-Clad Steel Wire for Electronic Application
- ASTM B105, Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
- CEN/TS 13388, Copper and copper alloys — Compendium of compositions and products
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 19642-1 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 19642-3:2019, Road vehicles — Automotive cables — Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables |