この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
1 スコープ
この文書は、以下を含むすべてのライフサイクル段階で、質量管理によってオフショア施設の重量と重心 (CoG) を管理および制御するための要件を指定します。コンセプト デザイン、フロント エンド エンジニアリング デザイン (FEED)、詳細エンジニアリング、建設、運用。これらは、新しい施設 (グリーンフィールド) または既存の施設への変更 (ブラウンフィールド) です。
重量管理は、構造的完全性管理 (SIM) を促進するために、運用、廃止措置、および撤去を通じて必要です。この文書の規定は、すべてのタイプの固定設備および浮体設備に適用されます。
重量管理には、静的質量のあるアイテムのみが含まれます。
雪と氷の積荷は、施設の一部とは見なされないため除外されます。動的荷重は、ISO 19904-1, ISO 19901-6, および ISO 19901-7 で扱われています。
このドキュメントは以下を指定します:
- a)集合体と施設全体の重量と CoG を管理および制御するための要件;
- b)重量と CoG インターフェースを管理するための要件。
- c)重量および CoG の推定と報告のための標準化された用語;
- d)超過禁止 (NTE) の重みと予算の重みを決定するための要件。
- e)タグ付けされた機器、アセンブリ、モジュール、および施設の重量および重心 (CoG) の計量および決定に関する要件。
このドキュメントは次の場合に使用できます。
- f)適切な建設方法または場所、および設置戦略の原価計算、スケジュール作成、または決定の基礎として。
- g)体重管理計画および報告システムの計画、評価、準備の基礎として;
- h)契約参照として;
- i)構造解析またはモデルを改良する手段として。
1 Scope
This document specifies requirements for managing and controlling the weight and centre of gravity (CoG) of offshore facilities by means of mass management during all lifecycle phases including; conceptual design, front end engineering design (FEED), detail engineering, construction and operations. These can be new facilities (greenfield) or modifications to existing facilities (brownfield).
Weight management is necessary throughout operations, decommissioning and removal to facilitate structural integrity management (SIM). The provisions of this document are applicable to fixed and floating facilities of all types.
Weight management only includes items with static mass.
Snow and ice loads are excluded as they are not considered to be part of the facility. Dynamic loads are addressed in ISO 19904-1, ISO 19901-6 and ISO 19901-7.
This document specifies:
- a) requirements for managing and controlling weights and CoGs of assemblies and entire facilities;
- b) requirements for managing weight and CoG interfaces;
- c) standardized terminology for weight and CoG estimating and reporting;
- d) requirements for determining not-to-exceed (NTE) weights and budget weights;
- e) requirements for weighing and determination of weight and centre of gravity (CoG) of tagged equipment, assemblies, modules and facilities;
This document can be used:
- f) as a basis for costing, scheduling or determining suitable construction method(s) or location(s) and installation strategy;
- g) as a basis for planning, evaluating and preparing a weight management plan and reporting system;
- h) as a contract reference;
- i) as a means of refining the structural analysis or model.