※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、ISO/TC 163 技術委員会「建築環境における熱性能とエネルギー使用」 、小委員会 SC 3「断熱製品」によって作成されました。
1 スコープ
この文書は、産業設備や建築設備の断熱、非耐火用途に使用される工場製アルミノケイ酸ウール製品の分類、要件、および試験方法を規定しています。製品はブランケット、モジュール、フェルト、ボード、紙、繊維などの形態で納品されます。
この文書では、製品の特性と試験方法、マーキングとラベルについて説明します。
この文書は、特定の用途における目的への適合性を実証するために、製品によって達成される特定の特性の必要なレベルを指定するものではありません。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
この文書の目的上、ISO 9229, ISO 836, および以下で与えられる用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
アルミノケイ酸塩ウール
ASW
主に溶融した原料鉱物から製造される非晶質高温断熱ウール (HTIW)
注記 1:主成分は Al 2 O 3および SiO 2であり、ZrO 2および Cr 2 O 3を含む場合があります。
3.2
アルミノケイ酸塩モジュール
アルミノケイ酸ウール (3.1) ブランケットは、シートをニードリング、積み重ね、または折り畳むことによって厚い部分に形成され、より高密度に圧縮され、通常は一体型固定システムとともに供給されます。
3.3
アルミノシリケート紙
抄紙機で成形された薄くて柔軟な絶縁材料
参考文献
| 1 | ISO 12570, 建築材料および製品の湿熱性能 — 高温での乾燥による水分含有量の測定 |
| 2 | GB/T 16400-2015, アルミノシリケートウールとその断熱製品 |
| 3 | BS EN 1094-1:2008, 断熱耐火製品Part 1: 高温断熱ウール製品の用語、分類および試験方法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 3, Thermal insulation products.
1 Scope
This document specifies the classification, requirements and test methods for factory-made aluminosilicate wool products which are used for thermal insulation of industrial installations and building equipment, for non-refractory applications. The products are delivered as blanket, module, felt, board, paper, textile and other forms.
This document describes product characteristics and testing methods, marking and labelling.
This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 836, Terminology for refractories
- ISO 8302, Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus
- ISO 8894-1, Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods (cross-array and resistance thermometer)
- ISO 9229, Thermal insulation — Vocabulary
- ISO 10635, Refractory products — Methods of test for ceramic fibre products
- ISO 13787, Thermal insulation products for building equipment and industrial installations — Determination of declared thermal conductivity
- ISO 29465, Thermal insulating products for building applications — Determination of length and width
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 9229, ISO 836 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
aluminosilicate wool
ASW
amorphous High Temperature Insulating Wool (HTIW) manufactured predominantly from molten raw minerals
Note 1 to entry: The main ingredients are Al2O3 and SiO2, and may contain ZrO2 and Cr2O3.
3.2
aluminosilicate module
aluminosilicate wool (3.1) blanket formed into thick sections by needling, stacking or folding sheets, compressed to a higher density and typically supplied with integral anchoring systems
3.3
aluminosilicate paper
thin and flexible insulating material formed on a paper-making machine
Bibliography
| 1 | ISO 12570, Hygrothermal performance of building materials and products — Determination of moisture content by drying at elevated temperature |
| 2 | GB/T 16400-2015, Aluminosilicate wool and it’s product for thermal insulation |
| 3 | BS EN 1094-1:2008, Insulating refractory products Part 1: Terminology, classification and methods of test for high temperature insulation wool products |