この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
箇条 3 から箇条 7 は、電磁流量計の定義、記号、および基本理論をカバーしています。このドキュメントは、挿入タイプのメーター、部分的に充填されたメーター、または非導電性および高導電性流体用のメーターを対象としていません。
箇条 8 は、現場で電磁流量計の最高の性能を達成するために、設置のタイプと実践、さまざまなタイプのメーター構造、トランスミッター、レイの長さ、およびサイジングをカバーしています。
箇条 9 から 11 は、キャリブレーション、検証、評価、および不確実性分析のいくつかの方法をカバーしています。これは、ユーザーまたは独立した試験機関が製造業者の相対的な性能を検証し、アプリケーションの適合性を実証するのに役立ちます。
このドキュメントで指定されているテストは、非常に困難な作業用に特別に設計された機器には必ずしも十分ではありません。逆に、制限された一連のテストは、限られた範囲の条件内で実行するように設計された機器に適している場合があります。
このドキュメントは、ユーザーおよびメーカー向けです。
Introduction
Clauses 3 to 7 cover the definitions, symbols and basic theory of electromagnetic flowmeters. This document does not cover insertion type meters, partially filled meters or meters for non-conductive and highly conductive fluids.
Clause 8 covers installation types and practice, the different types of meter construction, transmitters, lay lengths and sizing, in order to achieve the best performance of the electromagnetic flowmeter in the field.
Clauses 9 to 11 cover some methods of calibration, verification, evaluation, and uncertainty analysis, which can be useful for users or independent testing establishments to verify manufacturer’s relative performance and to demonstrate suitability of application
The tests specified in this document are not necessarily sufficient for instruments specifically designed for unusually difficult duties. Conversely, a restricted series of tests may be suitable for instruments designed to perform within a limited range of conditions.
This document is for users and manufacturers.