この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令、 Part 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
ISO 規格の自主的な性質に関する説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則に対する ISO の遵守に関する情報については、以下を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書を担当する委員会は、ISO/TC 46, 情報と文書、小委員会 SC 9, 識別と説明です。
この第 5 版は、技術的に改訂された第 4 版 (ISO 2108:2005) を取り消して置き換えるものです。これは、資格のある出版物に ISBN を申請して割り当てる登録者の責任を規定しています。 2007 年 1 月以降、ISBN はサプライ チェーンで 13 桁の形式でのみ有効であるため、10 桁の ISBN に関する仕様とそれぞれの計算方法は削除されました。新しい参考資料では、ISBN-A として登録して「実行可能」にするか、URN:ISBN に組み込むなど、デジタル ネットワークで ISBN を解決する方法について説明しています。特にデジタル出版物に関して、関連するメタデータと ISBN の割り当てに関する追加の仕様も含まれています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of ISO standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The committee responsible for this document is ISO/TC 46, Information and documentation, Subcommittee SC 9, Identification and description.
This fifth edition cancels and replaces the fourth edition (ISO 2108:2005), which has been technically revised. It specifies the responsibilities of registrants who apply for and assign ISBN to qualifying publications. Since January 2007, ISBN is only valid in the supply chain in its 13-digit form so the specifications relating to the 10-digit ISBN and its respective calculation method have been removed. A new informative annex describes how an ISBN can be resolved on digital networks such as by being registered as an ISBN-A to become “actionable” or by incorporation into URN:ISBN. Additional specifications on associated metadata and the assignment of ISBN, particularly with respect to digital publications, are also included.