この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
純音の周波数と音圧レベルの組み合わせを定義する曲線は、同じように大きく知覚され、人間の聴覚系の基本的な特性を表し、心理音響学の分野で基本的に重要です。 ISO 226:1987 では、自由音場および拡散音場の聴取条件下での聴力閾値に関するデータとともに、このような等ラウドネス レベルの等高線が指定されています。
注記 1等ラウドネス レベルは、ノイズの帯域についても決定できます。ただし、ノイズの帯域に関するデータが不十分であるため、この国際規格では純音の等ラウドネス レベルの等高線のみが指定されています。それにもかかわらず、この国際規格は、ノイズの 1/3 オクターブ帯域に適用できます。
この国際規格の技術的な改訂中に、利用可能な等ラウドネス レベルのデータが十分ではなく、聴覚の閾値が必要だったため、閾値と超閾値のデータを 2 つの別々の文書に分けることが決定されました。しきい値は、シリーズの一部として、ISO 389-7:1996, 音響 — 聴力測定機器の校正のための基準ゼロ — Part 7: 自由音場および拡散音場リスニング条件下でのヒアリングの基準しきい値で指定されました。聴力測定機器の校正のための基準ゼロ値に関する国際規格の。等ラウドネス レベルの等高線は、この国際規格に示されています。これらは、ISO 226:1987 のデータに関連して改訂されています。
注記 2 ISO 389-7:1996 は現在、しきい値データをこの版の ISO 226 に合わせるために改訂中です。
Introduction
Curves defining combinations of pure tones in terms of frequency and sound pressure level, which are perceived as equally loud, express a fundamental property of the human auditory system and are of basic importance in the field of psychoacoustics. Together with data on the threshold of hearing under free-field and diffuse-field listening conditions, such equal-loudness-level contours were specified in ISO 226:1987.
NOTE 1 Equal-loudness levels can also be determined for bands of noise. However, only the equal-loudness-level contours for pure tones are specified in this International Standard because insufficient data for bands of noise are available. Nevertheless, this International Standard could be applicable to one-third-octave-bands of noise.
During the technical revision of this International Standard, it was decided to separate threshold and supra-threshold data into two separate documents because the available equal-loudness-level data were not sufficient and hearing thresholds were needed. The threshold values were specified in ISO 389-7:1996, Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions, as a part of the series of International Standards concerning reference zero values for the calibration of audiometric equipment. The equal-loudness-level contours are presented in this International Standard. They have been revised relative to the data in ISO 226:1987.
NOTE 2 ISO 389-7:1996 is presently under revision in order to align the threshold data with this edition of ISO 226.