この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 27145-1 は、技術委員会 ISO/TC 22, 道路車両、小委員会 SC 3, 電気および電子機器によって作成されました。
ISO 21745-1 のこの初版は、技術的に改訂された ISO/PAS 27145-1:2006 を取り消し、置き換えます。
ISO 27145 は、一般タイトル「道路車両 — World-wide Harmonized On-Board Diagnostics (WWH-OBD) 通信要件の実装」の下にある次の部分で構成されています。
- Part 1: 一般情報とユースケースの定義
- Part 2: 共通データ辞書
- Part 3: 共通メッセージ辞書
- Part 4: 車両と試験装置の接続
以下の部分が準備中です。
- Part 6: 外部テスト機器
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 27145-1 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 3, Electrical and electronic equipment.
This first edition of ISO 21745-1 cancels and replaces ISO/PAS 27145-1:2006, which has been technically revised.
ISO 27145 consists of the following parts, under the general title Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements:
- Part 1: General information and use case definition
- Part 2: Common data dictionary
- Part 3: Common message dictionary
- Part 4: Connection between vehicle and test equipment
The following parts are under preparation:
- Part 6: External test equipment