※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 3.
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
この国際規格の一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 2896 は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 10, セルラー プラスチックによって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 2896:1987) を取り消して置き換えるものです。
附属書 A は、この国際規格の規範的な部分を形成します。
1 スコープ
この国際規格は、50 mm の水頭下に 4 日間浸漬した後の試験片にかかる浮力を測定することにより、硬質気泡プラスチックの吸水量を測定する方法を規定しています。補正は、試料の体積の変化を考慮し、試料の切断面セル内の水の体積を補正するために指定されています。吸水率は、いくつかの標本について、元の体積に対する体積の増加率の平均として表されます。
記載されている方法は、品質管理および製品仕様での使用を目的としています。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 291:1997, プラスチック - コンディショニングとテストのための標準大気
- ISO 1923:1981, セルラー プラスチックおよびゴム — 直線寸法の決定
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 2896 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 10, Cellular plastics.
This third edition cancels and replaces the second edition (ISO 2896:1987), which has been technically revised.
Annex A forms a normative part of this International Standard.
1 Scope
This International Standard specifies a method for the determination of the water absorption of rigid cellular plastics by measuring the buoyant force on a test specimen after immersion under a 50 mm head of water for 4 days. Corrections are specified to take account of any change in volume of the specimen and also to correct for the volume of water in the cut surface cells of the specimen. The water absorption is expressed as the average, for several specimens, of the percentage increase in volume relative to the original volume.
The method described is intended for quality control and for use in product specifications.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 291:1997, Plastics — Standard atmospheres for conditioning and testing
- ISO 1923:1981, Cellular plastics and rubbers — Determination of linear dimensions