この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は、技術委員会 ISO/TC 27, 石炭およびコークス、小委員会 SC 5, 分析方法によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 29541:2010) を廃止し、置き換えます。
主な変更点は以下のとおりです。
- 再現性限界が更新されました。
導入
総炭素、水素、窒素を信頼性高く測定することは、石炭の燃焼に適用される工学計算にとって重要です。炭素会計の目的には、石炭中の炭素の質量分率を正確かつ正確に決定することが不可欠です。
警告この文書の使用には、危険な物質、作業、および機器が含まれる可能性があります。その使用に関連するすべての安全上の問題に対処することを目的とするものではありません。適切な安全衛生慣行を確立し、使用前に規制上の制限の適用可能性を判断するのは、この文書のユーザーの責任です。
1 スコープ
この文書は、石炭とコークス中の総炭素、水素、窒素を機器法によって測定する方法を規定しています。
注この文書は、ISO 5725-1 の原則に従って、石炭についてのみ検証されています。精度データを決定するために研究所間研究 (ILS) で使用された一連のサンプルにはコークスが含まれていなかったため、コークスの精度限界を示すにはデータが不十分です。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 687, コークス - 一般分析試験サンプル中の水分の測定
- ISO 5068-2, 褐炭および褐炭 — 水分含有量の測定 — Part 2: 分析サンプル中の水分の間接重量法
- ISO 11722, 固体鉱物燃料 - 硬炭 - 窒素中での乾燥による一般分析試験サンプル中の水分の測定
- ISO 13909-4, 硬炭およびコークス — 機械的サンプリング — Part 4: 石炭 — 試験サンプルの調製
- ISO 18283, 石炭およびコークス — 手動サンプリング
3 用語と定義
この文書には用語や定義は記載されていません。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 1213-2, 固体鉱物燃料 — 語彙 — Part 2: サンプリング、試験および分析に関する用語 |
| 2 | ISO 5725-1, 測定方法と結果の精度 (真性と精度) — Part 1: 一般原則と定義 |
| 3 | ISO 5725-6:1994, 測定方法と結果の精度 (真度と精度) — Part 6: 精度値の実践での使用 |
| 4 | ISO 13909-2, 硬炭およびコークス — 機械的サンプリング — Part 2: 石炭 – 移動する流れからのサンプリング |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which mays be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 27, Coal and coke, Subcommittee SC 5, Methods of analysis.
This second edition cancels and replaces the first edition (ISO 29541:2010), which has been technically revised.
The main changes are as follows:
- the repeatability limits have been updated.
Introduction
The reliable determination of total carbon, hydrogen and nitrogen is important for engineering calculations applied to the combustion of coal. The precise and accurate determination of the mass fraction of carbon in coal is essential for carbon accounting purposes.
WARNING The use of this document can involve hazardous materials, operations and equipment. It does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This document specifies a method for the determination of total carbon, hydrogen and nitrogen in coal and coke by instrumental methods.
NOTE This document has been validated for coal only, in accordance with the principles of ISO 5725-1. The suite of samples used in the interlaboratory study (ILS) to determine the precision data did not include coke and therefore there is insufficient data to state precision limits for coke.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 687, Coke — Determination of moisture in the general analysis test sample
- ISO 5068-2, Brown coals and lignites — Determination of moisture content — Part 2: Indirect gravimetric method for moisture in the analysis sample
- ISO 11722, Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen
- ISO 13909-4, Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples
- ISO 18283, Coal and coke — Manual sampling
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 1213-2, Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis |
| 2 | ISO 5725-1, Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| 3 | ISO 5725-6:1994, Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| 4 | ISO 13909-2, Hard coal and coke — Mechanical sampling — Part 2: Coal – Sampling from moving streams |