※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 会員団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 3165 は ISO/TC 47化学技術委員会によって作成され、1973 年 7 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ハンガリー | 南アフリカ共和国 |
| オーストリア | インド | スペイン |
| ベルギー | アイルランド | スイス |
| ブルガリア | イスラエル | タイ |
| チリ | イタリア | 七面鳥 |
| チェコスロバキア | オランダ | イギリス |
| エジプト、アラブ共和国 | ニュージーランド | ソビエト連邦 |
| フランス | ポルトガル | |
| ドイツ | ルーマニア |
この文書に不承認を表明した加盟団体はなかった。
0 はじめに
場合によっては、サンプルを採取する行為により、サンプラーが人身傷害の危険にさらされたり、他の人の安全を危険にさらす危険な状態が引き起こされる危険性があります。この国際規格は、サンプリングに従事する者やサンプラーの活動を指揮する者、またサンプリング作業が安全な作業であることを保証するためにサンプリング作業が行われる施設の責任者を支援することを目的としています。
危険物の運送を規制する法律の存在にも注意が向けられており、この国際規格の使用者は、これらの要件および運送業者によって課された要件への遵守を確保する必要があります。
1 適用範囲と分野
この国際規格は、工業用途の化学製品のサンプリングにおける安全性に関する推奨事項を提供します。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 3165 was drawn up by Technical Committee ISO/TC 47, Chemistry, and circulated to the Member Bodies in July 1973.
It has been approved by the Member Bodies of the following countries:
| Australia | Hungary | South Africa, Rep. of |
| Austria | India | Spain |
| Belgium | Ireland | Switzerland |
| Bulgaria | Israel | Thailand |
| Chile | Italy | Turkey |
| Czechoslovakia | Netherlands | United Kingdom |
| Egypt, Arab, Rep. of | New Zealand | U.S.S.R. |
| France | Portugal | |
| Germany | Romania |
No Member Body expressed disapproval of the document.
0 INTRODUCTION
In some cases the act of taking a sample exposes the sampler to a risk of personal injury or may risk the creation of hazardous conditions endangering the safety of others. This International Standard is intended to assist those engaged in sampling or in directing the activities of samplers, and also those responsible for premises within which a sampling operation is performed, to ensure that sampling shall be a safe operation.
Attention is also directed to the existence of legislation regulating the carriage of dangerous goods, and users of this International Standard should ensure compliance with these requirements and with those imposed by the carriers.
1 SCOPE AND FIELD OF APPLICATION
This International Standard gives recommendations relating to safety in the sampling of chemical products for industrial use.