※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 3521 は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 12, 熱硬化性材料によって作成されました。
この第 2 版は、第 1 版 (ISO 3521:1976) を取り消して置き換えるものであり、そのうちの技術的な改訂版です。
1 スコープ
この国際規格は、不飽和ポリエステル樹脂およびエポキシ樹脂の全体の体積収縮を決定する方法を規定しています。
2 規範的参照
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行時点では、示されたエディションが有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 1675:1985, プラスチック - 液体樹脂 - 比重瓶法による密度の測定。
3 定義
この国際規格の目的のために、次の定義が適用されます。
3.1
全体の体積収縮
成形品を周囲温度まで冷却したときの、硬化中の収縮と硬化後の収縮の合計。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 3521 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 12, Thermosetting materials.
This second edition cancels and replaces the first edition (ISO 3521:1976), of which it constitutes a technical revision.
1 Scope
This International Standard specifies a method for the determination of the overall volume shrinkage of unsaturated polyester and epoxy resins.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 1675:1985, Plastics — Liquid resins — Determination of density by the pyknometer method.
3 Definition
For the purposes of this International Standard, the following definition applies.
3.1
overall volume shrinkage
The sum of the shrinkage during curing and the shrinkage after curing of a casting when cooled to ambient temperature.