※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令のPart 1 で説明されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令のPart 2 の編集規則に従って起草されました ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術協力に関する協定に従って、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 172, パルプ、紙、および板紙と協力して、技術委員会 ISO/TC 6, 紙、板紙、およびパルプによって作成されました。 ISO と CEN (ウィーン協定) の間。
この第 2 版は、技術的に改訂された第 1 版 (ISO 5263-3:2004) を取り消して置き換えるものです。
主な変更点は次のとおりです。
- 崩壊直後に懸濁液の温度を下げる必要性が明示されています。
ISO 5263 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
1 スコープ
この文書は、明るさを測定する場合を除いて潜在性を示す機械パルプの実験室湿式崩壊のための装置と手順を指定します。この装置と手順は、パルプを扱う他の国際規格の試験部分の準備に使用できます。
このドキュメントは、潜在性を示すすべての種類の機械パルプ (つまり、機械パルプ、半化学パルプ、および化学機械パルプ) に適用できます。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
機械パルプの崩壊
水中での機械的処理により、パルプストックでは遊離していた織り交ぜられた繊維が、それらの構造特性をあまり変化させずに再び互いに分離されます。
3.2
レイテンシー
機械パルプの状態:その特性の一部が抑制されており、高温でのパルプの崩壊が発生する必要がある
注記 1: 潜在性は、特に高濃度での機械的処理で得られた繊維の歪んだ形状によるものであり、その後冷却すると高濃度で保存されます。その保存は、リグニンの硬化によるものと考えられています。
注記 2:パルプの潜伏度は、一般に、機械的処理中に適用される一貫性とエネルギーに関連しています。
3.3
レイテンシーの除去
リグニンの軟化温度を超える温度を使用する機械的処理、すなわち崩壊と熱処理の組み合わせを使用する手順。
注記 1:この文書では、潜在性除去の温度は 85 °C 以上であると述べられています。
参考文献
| 1 | BEATH LR, NEILL MT, MASSE FA, メカニカル パルプのレイテンシ。カナダのパルプ紙雑誌、 6, 1966, T 423 |
| 2 | Mohlin UB, サーモメカニカル パルプの潜在性 — さまざまな分数の寄与。たっぴ。 1980, 63(3) pp.83-86 |
| 3 | Salmén L, Lucander M, Härkönen E, Sundholm J. In: 機械的パルプ化の基礎 - 木材のレオロジー挙動。製紙科学技術ハンドブック — Part 5: 機械パルプ。 (Sundholm J.編) Fapet Oy, Jyväskylä, 1999, pp. 35–9. |
| 4 | Mohlin UB, サーモメカニカル パルプの潜在効果に対するさまざまなパルプ画分の寄与。 1979年国際機械パルプ会議、トロント、オンタリオ。 1979年、pp.13-22 |
| 5 | DAWSON JA, MACLELLAN ADG, SHALLHORN PM, KARNIS A., メカニカル パルプの潜在特性を開発する迅速な方法、 Pulp and Paper Canada 、 79, 1978 、T 124-129 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 6, Paper, board and pulps, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 172, Pulp, paper and board, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 5263-3:2004), which has been technically revised.
The main changes are as follows:
- the requirement to reduce the temperature of the suspension immediately following disintegration has been made explicit.
A list of all parts in the ISO 5263 series can be found on the ISO website.
1 Scope
This document specifies an apparatus and the procedures for the laboratory wet disintegration of mechanical pulps that exhibit latency except when brightness is measured. This apparatus and procedure can be used for preparation of the test portion in other International Standards dealing with pulps.
This document is applicable to all kind of mechanical pulps (i.e. mechanical, semi-chemical and chemi-mechanical pulps) exhibiting latency.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 638-1, Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method — Part 1: Materials in solid form
- ISO 4119, Pulps — Determination of stock concentration
- ISO 14487, Pulps — Standard water for physical testing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
disintegration of mechanical pulp
mechanical treatment in water so that interlaced fibres, which were free in the pulp stock, are again separated from one another without appreciably changing their structural properties
3.2
latency
condition of a mechanical pulp in which some of its properties are inhibited and require disintegration of the pulp at elevated temperature to be developed
Note 1 to entry: Latency is due to the distorted form of the fibres acquired in mechanical processing, especially at high consistency, and subsequently preserved upon cooling at high consistency. It is assumed that its preservation is caused by the hardening of the lignin.
Note 2 to entry: The degree of latency in a pulp is generally related to the consistency and energy applied during the mechanical processing.
3.3
latency removal
procedure using a combination of mechanical treatment, i.e. disintegration, and heat treatment using a temperature exceeding the softening temperature of lignin
Note 1 to entry: In this document, the temperature for latency removal is stated to be not less than 85 °C.
Bibliography
| 1 | BEATH L.R., NEILL M.T., MASSE F.A., Latency in mechanical pulps. Pulp and Paper Mag. of Canada, 67 (10), 1966, T 423 |
| 2 | Mohlin U.-B., Latency in thermomechanical pulps — Contribution of the various fractions. Tappi. 1980, 63 (3) pp. 83–86 |
| 3 | Salmén L., Lucander M., Härkönen E., Sundholm J., In: Fundamentals of mechanical pulping — Rheological behaviour of wood. Papermaking Science and Technology Handbooks — Part 5: Mechanical Pulping. (Sundholm J., ed.). Fapet Oy, Jyväskylä, 1999, pp. 35–9. |
| 4 | Mohlin U.-B., The contribution of different pulp fractions to the latency effect in thermomechanical pulps. 1979 International Mechanical Pulping Conference, Toronto, Ontario. 1979, pp. 13-22 |
| 5 | DAWSON J.A., MACLELLAN A.D.G, SHALLHORN P.M., KARNIS A.,, A rapid method for development latent properties of mechanical pulps, Pulp and Paper Canada, 79 , 1978, T 124-129 |