この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序章
ラウドネスとラウドネス レベルは、音の 2 つの知覚属性であり、特定のリスニング条件下で人が知覚する音の強さの絶対的および相対的な感覚を表します。人には固有の個人差があるため、ラウドネスとラウドネス レベルはどちらも、一般集団の特定のサンプルに対して決定された中心傾向と分散のそれぞれの尺度によって特徴付けられる統計的推定量の性質を持っています。
ISO 532 シリーズの目的は、特定のリスニング条件下で耳科学的に正常な聴力を持つ人が知覚する音のラウドネスとラウドネス レベルを推定するために、音の物理的特性に基づく計算手順を指定することです。各手順は、多くの科学的および技術的アプリケーションで使用できる単一の数値を提供し、アプリケーションごとに個別の人間の観察研究を実施することなく、知覚されるラウドネスとサウンドのラウドネス レベルを推定します。ラウドネスは知覚量であり、その知覚は人によって異なる可能性があるため、計算されたラウドネス値は、耳科学的に正常な聴覚を持つ個人のグループによって知覚される平均ラウドネスの推定値にすぎません。
ISO 532-1 と ISO 532-2 では、ラウドネスを計算するための 2 つの異なる方法が指定されており、特定の音に対して異なる結果が得られる可能性があります。現時点ではどちらの方法についても一般的な好みを述べることができないため、特定の状況に最も適していると思われる方法を選択するのはユーザー次第です。選択を容易にするために、各方法のいくつかの主要な機能を以下に説明します。
このドキュメントの最初の方法は、定常音のラウドネスとラウドネス レベルの計算について説明しており、DIN 45631:1991 に基づいています。このドキュメントの 2 番目の方法は、特別なケースとして定常音を含む、任意の非定常 (時変) 音のラウドネスとラウドネス レベルの計算手順をカバーし、DIN 45631/A1:2010 に基づいています。
このドキュメントには、定常音と時変音のラウドネスとラウドネスレベルの推定につながる両方の方法のプログラムコードも含まれています。実行可能なコンピュータ プログラムも両方の方法に提供されます。適用されたソフトウェアは、ラウドネス値を計算するための標準であり、規定された許容範囲内で他の実装をチェックすることができ、ユーザーの利便性のために追加機能を提供します。
このドキュメントの定常音の方法は、以前の ISO 532:1975 の方法 B に含まれていた方法とはわずかに異なり、低周波の補正を指定し、アプローチの説明を数値指示のみに制限することで、独自のソフトウェアの説明を可能にしています。 .継続性の理由から、このドキュメントに記載されている方法は、後の改訂版である ISO 226:2003 ではなく、ISO 226:1987 に従っています。
定常音の方法の一般的な概念に基づいて、時変音の方法は、任意の非定常音に対するツヴィッカーのアプローチの一般化を取り入れています。もちろん、この一般化は、定常音に適用された場合に定常音の方法と同じラウドネス値を与えるという点で、定常音の方法と互換性があります。
ISO 532-2 で実装されている Moore-Glasberg 法は、定常音に限定されており、トーン、広帯域ノイズ、および鋭い線スペクトル成分を含む複雑な音に適用できます。 ISO 532-2 の方法は、ISO 532:1975 の方法とは異なります。 ISO 532:1975, 方法 A (スティーブンス ラウドネス) は削除されました。この方法はあまり使用されておらず、その予測は強い音色成分を含む音に対して正確ではなかったからです。 ISO 532-2 で説明されている方法は、低周波数範囲で計算されたラウドネスの精度も向上させ、2 つの耳で音が異なる条件下でのラウドネスの計算を可能にします。この方法は、ISO 226:2003 で定義されている等ラウドネス レベルの等高線と、ISO 389-7:2005 で定義されている聴力の基準しきい値によく一致することが示されています。
注記機器または機械の騒音放出/放出は、さまざまな国際規格で定義されている他の量によって判断することもできます (たとえば、ISO 1996-1, ISO 3740, ISO 9612, および ISO 11200 を参照)
Introduction
Loudness and loudness level are two perceptual attributes of sound, describing absolute and relative sensations of sound strength perceived by a person under specific listening conditions. Due to inherent individual differences among people, both loudness and loudness level have the nature of statistical estimators characterized by their respective measures of central tendency and dispersion determined for a specific sample of the general population.
The object of the ISO 532 series is to specify calculation procedures based on physical properties of sound for estimating loudness and loudness level of sound as perceived by persons with otologically normal hearing under specific listening conditions. Each procedure provides single numbers that can be used in many scientific and technical applications to estimate the perceived loudness and loudness level of sound, without conducting separate human observer studies for each application. Because loudness is a perceived quantity, the perception of which may vary among people, any calculated loudness value represents only an estimate of the average loudness as perceived by a group of individuals with otologically normal hearing.
ISO 532-1 and ISO 532-2 specify two different methods for calculating loudness which may yield different results for given sounds. Since no general preference for one or the other method can presently be stated, it is up to the user to select the method which appears most appropriate for the given situation. Some major features of each of the methods are described below to facilitate the choice.
The first method of this document describes the calculation of loudness and loudness level of stationary sounds and is based on DIN 45631:1991. The second method of this document covers the procedures for calculation of loudness and loudness level of arbitrary non-stationary (time-varying) sounds, including stationary sounds as a special case, and is based on DIN 45631/A1:2010.
This document also includes a program code for both methods leading to estimates of loudness and loudness level for stationary and time-varying sounds. An executable computer program is also provided for both methods. The applied software is normative for calculating loudness values, against which other implementations can be checked subject to stated tolerances, and provides additional functionality for the convenience of the user.
The method for stationary sounds in this document differs slightly from the methods included in the previous ISO 532:1975, method B, by specifying corrections for low frequencies and by restricting the description of the approach to numerical instructions only, thus allowing a unique software description. For reasons of continuity, the method given in this document is in accordance with ISO 226:1987 instead of the later revised version, ISO 226:2003.
Based on the general concept of the method for stationary sounds, the method for time-varying sounds incorporates a generalization of the Zwicker approach to arbitrary, non-stationary sounds. Of course, this generalization is compatible with the method for stationary sounds in that it gives the same loudness values as the method for stationary sounds if applied to stationary sounds.
The Moore-Glasberg method as implemented in ISO 532-2 is limited to stationary sounds and can be applied to tones, broadband noises and complex sounds with sharp line spectral components. The method in ISO 532-2 differs from those in ISO 532:1975. ISO 532:1975, method A (Stevens loudness), was removed as this method was not often used and its predictions were not accurate for sounds with strong tonal components. The method described in ISO 532-2 also improves the precision of calculated loudness in the low frequency range and allows for calculation of loudness under conditions where the sound differs at the two ears. It has been shown that this method provides a good match to the contours of equal loudness level as defined in ISO 226:2003 and the reference threshold of hearing as defined in ISO 389-7:2005.
NOTE Equipment or machinery noise emissions/immissions can also be judged by other quantities defined in various International Standards (see e.g. ISO 1996-1, ISO 3740, ISO 9612 and ISO 11200).