※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 5637 は、技術委員会 ISO/TC 6, 紙、板紙およびパルプによって作成されました。
この第 2 版は、第 4, 6, 7, 8, 9 節が技術的に改訂された第 1 版 (ISO 5637:1978) を取り消して置き換えます。
1 スコープ
この国際規格は、指定された時間水に完全に浸漬した後の紙および板紙の吸水率の測定方法を指定しています。
この方法は、ある程度の耐水性を有するすべての種類の紙および板紙に適用できます。トイレットペーパーなど吸収性の高い紙には使用できません。
注 —この方法は、ISO 769:1972 で指定されているものと類似しています。
2 参考文献
次の規格には規定が含まれており、このテキストで参照することにより、この国際規格の規定を構成します。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 186:1985, 紙と板紙 — 平均品質を決定するためのサンプリング。
- ISO 187:1977, 紙と板紙 — 試験サンプルの調整。
3 つの定義
この国際規格の目的のために、次の定義が適用されます。
3.1
吸水
指定された試験条件下で単位面積あたりに吸収される水の質量。
3.2
相対吸水率
条件付けされた試験片の質量に対する吸収された水の質量の比率。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 5637 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps.
This second edition cancels and replaces the first edition (ISO 5637:1978), clauses 4, 6, 7, 8 and 9 of which have been technically revised.
1 Scope
This International Standard specifies a method for the determination of the water absorption of paper and board after total immersion in water for a specified time.
The method is applicable to all types of paper and board which have a degree of water resistance. It is not applicable to very absorbent papers such as toilet tissue.
NOTE — The method is analogous to that specified in ISO 769:1972, Fibre building boards — Hard and medium boards — Determination of water absorption and of swelling in thickness after immersion in water.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 186: 1985, Paper and board — Sampling to determine average quality.
- ISO 187: 1977, Paper and board — Conditioning of test samples.
3 Definitions
For the purposes of this International Standard, the following definitions apply.
3.1
water absorption
The mass of water absorbed per unit area under the specified conditions of test.
3.2
relative water absorption
The ratio of the mass of water absorbed to the mass of the conditioned test piece.