この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 6342 は、技術委員会 ISO/TC 171, ドキュメント イメージング アプリケーション、小委員会 SC 2, アプリケーションの問題によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 6342:1993) を取り消して置き換えるものです。
序章
アパーチャ カードは、多くのマイクロフィルム システムで広く使用されています。種類によって肉盛り部分の厚みが異なるため、肉盛り厚みを測定する方法が必要です。
1 スコープ
この国際規格は、製造および検査の目的で、アパーチャ カード (カメラおよびコピー カード) のビルドアップ領域の厚さを測定する方法を指定します。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 534:1988, 紙および板紙 — 厚さと見かけの嵩密度または見かけのシート密度の決定
- ISO 6196-1:1993, 顕微鏡 — 語彙 — 1: 一般用語
- ISO 6196-4:1998, 顕微鏡 — 語彙 — 4: 材料および包装
3 用語と定義
このドキュメントの目的のために、ISO 6196-1 および ISO 6196-4 に記載されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6342 was prepared by Technical Committee ISO/TC 171, Document imaging applications, Subcommittee SC 2, Application issues.
This second edition cancels and replaces the first edition (ISO 6342:1993), which has been technically revised.
Introduction
Aperture cards are widely used in many microfilm systems. As the various kinds differ in the thickness of the buildup area, a method of measuring the buildup thickness is necessary.
1 Scope
This International Standard specifies a method of measuring the thickness of the buildup area on aperture cards (camera and copy cards) for manufacturing and inspection purposes.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 534:1988, Paper and board — Determination of thickness and apparent bulk density or apparent sheet density
- ISO 6196-1:1993, Micrographics — Vocabulary — 1: General terms
- ISO 6196-4:1998, Micrographics — Vocabulary — 4: Materials and packaging
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6196-1 and ISO 6196-4 apply.