※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。それらは、投票するメンバー団体による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 7988 は、技術委員会 ISO/TC 39, 工作機械によって作成されました。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、機械の各部分に適切な命名法を指定し、ISO 230-1 を参照して、両端ほぞ加工機の幾何学的および実用的な試験を規定し、汎用の機械に適用される対応する許容偏差を示します。通常の精度。
注 — ISO の 3 つの公式言語 (英語、フランス語、およびロシア語) で使用される用語に加えて、この国際規格は、ドイツ語、スペイン語、イタリア語、およびスウェーデン語で同等の用語を提供します。これらは、ドイツ、F, スペイン (AENOR)、イタリア (UNI)、およびスウェーデン (SIS) の加盟機関の責任の下で発行されています。ただし、ISO 用語と見なすことができるのは、公用語で指定された用語のみです。
この国際規格は、機械の精度の検証のみを扱います。機械の動作テスト (振動、異音、コンポーネントのスティックスリップ動作など) や、一般的に精度を確認する前にチェックする必要がある機械の特性 (速度、送りなど) には適用されません。テスト済み。
この国際規格は、ISO 7984 の番号 82.2 で指定された機械に適用されます1) 。
2 規範的参照
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行時点では、示されたエディションが有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下にリストされている規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 230-1:1986, 工作機械の受け入れコード — 1: 無負荷または仕上げ条件で動作する機械の幾何学的精度。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 7988 was prepared by Technical Committee ISO/TC 39, Machine tools.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies the nomenclature appropriate to each part of the machine and, with reference to ISO 230-1, the geometrical and practical tests for double-end tenoning machines, and gives the corresponding permissible deviations which apply to machines of general purpose use and normal accuracy.
NOTE — In addition to terms used in the three official ISO languages (English, French and Russian), this International Standard gives the equivalent terms in the German, Spanish, Italian and Swedish languages; these are published under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (AENOR), Italy (UNI) and Sweden (SIS). However, only the terms given in the official languages can be considered as ISO terms.
This International Standard deals only with the verification of the accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stickslip motion of the components, etc.), nor to its characteristics (speeds, feeds, etc.) which should generally be checked before the accuracy is tested.
This International Standard applies to those machines designated by the number 82.2 in ISO 7984 1) .
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard listed below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 230-1: 1986, Acceptance code for machine tools — 1: Geometric accuracy of machines operating under no-load or finishing conditions.