この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 8007-3 は、技術委員会 ISO/TC 47, 化学、小委員会 SC 7, 酸化アルミニウム、氷晶石、フッ化アルミニウム、フッ化ナトリウム、アルミニウム産業用炭素質製品によって作成されました。
ISO 8007 は、アルミニウムの製造に使用される炭素質材料 - サンプリング計画と個々のユニットからのサンプリングという一般的なタイトルの下に、次の部分で構成されています。
- Part 1: 陰極ブロック
- Part 2: プリベーク アノード
- Part 3: サイドウォール ブロック
序章
一般的な成形耐火製品のサンプリングの詳細は、ISO 5022 に記載されています。ISO 5022 には、委託品またはロットの受入試験のためのサンプリング計画の統計的根拠が詳述されています。
アルミニウムの製造に使用される側壁ブロックには、サンプリングに関する特定の要件があり、ISO 5022 に示されているサンプリングの統計的根拠を適用できますが、追加または修正された要件が適用されます。 ISO 3951 では、受入品質限界 (AQL) による検査のサンプリング計画について説明しています。 ISO 2859-0 および ISO 2859-1 は、属性による検査のサンプリング計画について説明しています。
1 スコープ
ISO 8007 のこの部分では、ブロックの委託品をサンプリングし、アルミニウムの製造に使用される単一のサイドウォール ブロックからテスト サンプルを採取する手順について説明します。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 2859-0, 属性による検査のためのサンプリング手順 — 0: ISO 2859 属性サンプリング システムの概要
- ISO 2859-1, 属性による検査のためのサンプリング手順 — 1: ロットごとの検査のための受け入れ品質限界 (AQL) によって索引付けされたサンプリング方式
- ISO 3951, 不適合率の変数による検査のためのサンプリング手順とチャート
- ISO 5022, 成形耐火物 — サンプリングおよび受け入れ試験
- ISO 6206, 工業用化学製品 - サンプリング - 語彙
3 用語と定義
このドキュメントの目的のために、ISO 2859-0, ISO 2859-1, ISO 3951, ISO 5022, および ISO 6206 に記載されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8007-3 was prepared by Technical Committee ISO/TC 47, Chemistry, Subcommittee SC 7, Aluminium oxide, cryolite, aluminium fluoride, sodium fluoride, carbonaceous products for the aluminium industry.
ISO 8007 consists of the following parts, under the general title Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units:
- Part 1: Cathode blocks
- Part 2: Prebaked anodes
- Part 3: Sidewall blocks
Introduction
Details of the sampling of shaped refractory products in general are given in ISO 5022, which details the statistical basis for sampling plans for acceptance testing of a consignment or lot.
Sidewall blocks used in the production of aluminium have specific requirements for sampling and, while the statistical basis for sampling given in ISO 5022 can be applied, further or modified requirements apply. ISO 3951 describes sampling plans for inspection by acceptance quality limit (AQL). ISO 2859-0 and ISO 2859-1 describe sampling plans for inspection by attributes.
1 Scope
This part of ISO 8007 describes procedures for sampling consignments of blocks and taking test samples from single sidewall blocks used in the production of aluminium.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 2859-0, Sampling procedures for inspection by attributes — 0: Introduction to the ISO 2859 attribute sampling system
- ISO 2859-1, Sampling procedures for inspection by attributes — 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 3951, Sampling procedures and charts for inspection by variables for percent nonconforming
- ISO 5022, Shaped refractory products — Sampling and acceptance testing
- ISO 6206, Chemical products for industrial use — Sampling — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 2859-0, ISO 2859-1, ISO 3951, ISO 5022 and ISO 6206 apply.