※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso .org/iso/foreword.html .
この文書を担当する委員会は、ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 1, ゴムおよびプラスチック ホースおよびホース アセンブリです。
この第 4 版は、次の変更で技術的に改訂された第 3 版 (ISO 8331:2014) を取り消し、置き換えます。
- 4.9は削除されました。
1 スコープ
この文書は、ゴム製およびプラスチック製のホースおよびホース アセンブリを、使用前に、受け取ったときの状態にできるだけ近い状態に維持し、予想される耐用年数を得るために設計された推奨事項を示しています。
注記この文書は、該当する国内法規と併せて使用することを意図しています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントの目的のために、ISO 8330 に記載されている用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 8330, ゴムおよびプラスチックホースおよびホースアセンブリ — 語彙 |
| [2] | 購入ガイド.オフショア係留用のローディングおよびディスチャージ ホースの製造とテスト。 OCIMF, 第 5 版、2009 年 |
| [3] | 現場でのホースの取り扱い、保管、検査および試験に関するガイドライン、第 2 版 (1995 年)、OCIMF (以前はブイ係留フォーラム ホース ガイドと呼ばれていました) |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
The committee responsible for this document is ISO/TC 45, Rubber and rubber products, Subcommittee SC 1, Rubber and plastics hoses and hose assemblies.
This fourth edition cancels and replaces the third edition (ISO 8331:2014), which has been technically revised with the following change:
- 4.9 has been deleted.
1 Scope
This document sets out recommendations designed to maintain rubber and plastics hoses and hose assemblies, prior to use, in a condition as close as possible to the condition they were in when they were received and to obtain the expected service life.
NOTE It is intended that this document be used in conjunction with any applicable national statutory regulations.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1402, Rubber and plastics hoses and hose assemblies — Hydrostatic testing
- ISO 2230, Rubber products — Guidelines for storage
- ISO 8031, Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 8330 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 8330, Rubber and plastics hoses and hose assemblies — Vocabulary |
| [2] | Guide to Purchasing. Manufacturing and Testing of Loading and Discharge Hoses for Offshore Moorings. OCIMF, Fifth Edition, 2009 |
| [3] | Guidelines for the Handling, Storage, Inspection and Testing of Hoses in the Field, 2nd Edition (1995), OCIMF (previously called the Buoy Mooring Forum Hose Guide) |