※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。これらは、加盟団体の投票による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 8787 は、ISO/TC 6紙、板紙、パルプ技術委員会によって作成されました。
ユーザーは、特に明記されていない限り、すべての国際規格は随時改訂されること、および他の国際規格への言及はその最新版を意味することに留意する必要があります。
1 適用範囲と適用分野
この国際規格は、クレム法による紙および板紙の毛細管上昇を測定する手順を規定しています。あぶらとり紙などの比較的吸水性の高い紙などのサイズのない紙を対象としています。
この方法は、毛管隆起が 5 mm 未満の材料には推奨されません。ISO 535 の紙および板紙 - 吸水率の測定 - コブ法などの他の試験の方が適している可能性があります。
参考文献2件
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 8787 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps.
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
1 Scope and field of application
This International Standard specifies the procedure for determining the capillary rise of paper and board by the Klemm method. It is intended for unsized papers such as blotting papers and other papers having a relatively high water absorbency.
The method is not recommended for materials having a capillary rise of less than 5 mm, for which other tests such as in ISO 535, Paper and board — Determination of water absorption — Cobb method, may be more suitable.
2 References
- ISO 186, Paper and board — Sampling to determine average quality.
- ISO 187, Paper and board — Conditioning of samples.
- ISO 3696, Water for laboratory use — Specifications and test methods. 1)
- ISO 5725, Precision of test methods — Determination of repeatability and reproducibility by inter-laboratory tests.